***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Mon Nov 25, 2024 10:14 pm


Board index » CNC and Lutherie

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 
  Print view Previous topic | Next topic 
Author Message
mikebrittain
 Post subject: Laser for pearl
PostPosted: Tue Nov 04, 2008 11:33 pm 
Offline
Walnut
Walnut

Joined: Tue Nov 04, 2008 9:34 pm
Posts: 10
I have a 75 watt Epilog. It's very good for pearl veneers and abalam up to .030.
I use slow speed & low power.

myspace.com/mikebrittain

_________________
Mike Brittain
gmbrittain@gmail.com
myspace.com/mikebrittain
Top
 Profile  
 
npalen
 Post subject: Re: Laser for pearl
PostPosted: Wed Nov 05, 2008 4:45 pm 
Offline
Koa
Koa
User avatar

Joined: Sat Jan 08, 2005 4:19 am
Posts: 1534
Location: United States
First name: Nelson
Last Name: Palen
That's interesting, Mike.
What kind of cut surface does it leave?
Nelson
Top
 Profile  
 
mikebrittain
 Post subject: Re: Laser for pearl
PostPosted: Thu Nov 06, 2008 2:35 pm 
Offline
Walnut
Walnut

Joined: Tue Nov 04, 2008 9:34 pm
Posts: 10
The edges are very clean & sharp. Any burning will clean right off.

I will say that the learning curve is tough, similar to cnc routers etc.

Mike

_________________
Mike Brittain
gmbrittain@gmail.com
myspace.com/mikebrittain
Top
 Profile  
 
Erik Hauri
 Post subject: Re: Laser for pearl
PostPosted: Thu Nov 06, 2008 8:02 pm 
Offline
Koa
Koa
User avatar

Joined: Sat Jan 26, 2008 12:31 pm
Posts: 510
Location: Gaithersburg MD
First name: Erik
Last Name: Hauri
State: Maryland
Focus: Build
Status: Amateur
Is that laser a CO2, YAG or FIBER?

_________________
The member formerly known as erikbojerik....
Top
 Profile  
 
Michael Dale Payne
 Post subject: Re: Laser for pearl
PostPosted: Fri Nov 07, 2008 10:44 am 
Offline
Old Growth Brazilian
Old Growth Brazilian

Joined: Tue Dec 28, 2004 1:56 am
Posts: 10707
Location: United States
This may be true with a laminate like ablam as the laminating media may keep the shell veneers from disintegrating, but laser will not work with natural shell as the heat powers the shell near a 64th of an inch either side of the beam and makes for very raged edge. I have been through the testing of natural shell being laser cut several times at several differnt settings and speeds. water Jet works great. I am supprised that it work on ablam. would love to see close-up photos.
Top
 Profile  
 
KenH
 Post subject: Re: Laser for pearl
PostPosted: Fri Nov 07, 2008 11:40 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Mar 01, 2007 3:15 pm
Posts: 2302
Location: Florida
You may want to call Bob Rigaud at http://www.rgmusic.com/ To find out about the details of using a laser on Pearl and abalone. He has been using it for quite some time and his inlay work is really good. Hes a super nice guy too and loves to talk to other luthiers.

_________________
Reguards,

Ken H
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 

Board index » CNC and Lutherie

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 18 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com