Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sun Nov 24, 2024 1:54 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject:
PostPosted: Fri Jan 04, 2008 1:38 pm 
Offline
Koa
Koa

Joined: Tue Jul 04, 2006 3:24 am
Posts: 744
Location: United States
I am currently working on a radius jig and need to know a few things. What dimensions are your fingerboards? (thickness, width at nut, width at body, scale length)

Thanks!

_________________
Brad
Avon, OH


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jan 04, 2008 2:08 pm 
Offline
Cocobolo
Cocobolo

Joined: Sat Jun 16, 2007 3:50 am
Posts: 214
Location: United States
For me, thickness varies but I normally start with a blank that is
~3/8" before radiusing.  Sometimes thicker if I want to recess the
truss rod into it a little.



Scale length is variable...I make both basses and guitars.



And I normally taper the board after radiusing.




Top
 Profile  
 
 Post subject:
PostPosted: Fri Jan 04, 2008 2:13 pm 
Offline
Koa
Koa

Joined: Tue Jul 04, 2006 3:24 am
Posts: 744
Location: United States
How much taper?

_________________
Brad
Avon, OH


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jan 04, 2008 2:30 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Sun Feb 27, 2005 10:11 am
Posts: 2173
My boards are a hair over 1/4" at the center.

I use 24.9,(triple o)25.25 (archtop)and 25.4 (Dreadnout)scales.

I usually taper them 3/8" at the 12th fret.

I use a 12"radius for archtops and a 16" radius for flattops.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jan 05, 2008 9:39 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Tue May 02, 2006 9:02 am
Posts: 2351
Location: Canada
First name: Bob
Last Name: Garrish
City: Toronto
State: Ontario
Country: Canada
Status: Professional
On board thicknesses, old-school guys like Mario like thinner boards (almost down to 3/16"), most guys use 1/4" thickness, and Selmer-style guitars (Michael Collins) use 5/16". It makes sense, most production guitars I've seen these days have 1/4" thick boards, but a lot of old acoustics have thinner boards.

I like 24.5-25" scales on electrics, and 25.34" on acoustics, though I might be prone to try longer and shorter scales on acoustics for different instruments. Longer works better for the way I play chords, shorter works better for the way I play lead on acoustics.

Nut width usually just under 1.75" (1 5/8", 1 11/16")

Width at the 12th fret will be:

(nut width)+(string spread at saddle)+1/4"
------------------------------------------
                      2

That'll give you 1/8" of board above and below the strings.

_________________
Bob Garrish
Former Canonized Purveyor of Fine CNC Luthier Services


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jan 05, 2008 9:42 am 
Offline
Koa
Koa

Joined: Tue Jul 04, 2006 3:24 am
Posts: 744
Location: United States
Bob...thanks for the input!

_________________
Brad
Avon, OH


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jan 05, 2008 1:20 pm 
Offline
Contributing Member
Contributing Member

Joined: Mon Jan 03, 2005 7:46 am
Posts: 1315
Location: Branson, MO
First name: stan
Last Name: thomison
City: branson
State: mo
Zip/Postal Code: 65616
Country: united states
Focus: Build
Status: Professional
Brad can't wait to see the rig. If it is like the bending and circle(rosette)tools, I bet will be outstanding.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 28 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com