Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sat Nov 23, 2024 8:25 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 10 posts ] 
Author Message
 Post subject:
PostPosted: Mon Nov 05, 2007 3:41 am 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 03, 2007 7:16 am
Posts: 567
Location: United States
Hello,
I have completed my 1st binding install, sanded a lot and put a coat of shellac on the top for protection. I plan to start pore filling this evening. Will the shellac that has run down onto the sides affect the pore filling or cause any type of discoloration... ie. do I really need to sand it off before applying my epoxy pore filler?
thanks.
Here's a shot... you can see the runs at the near the neck joint.



_________________
Chris Oliver
Infinity Luthiers
...in the shop.

live every minute...


Top
 Profile  
 
 Post subject:
PostPosted: Mon Nov 05, 2007 3:47 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Nov 03, 2006 6:50 pm
Posts: 2711
Location: Victoria, BC
First name: John
Last Name: Abercrombie
Status: Amateur
Chris:
I'd definitely try to get the bulk of the shellac drip removed before putting on the epoxy.
Often a paper towel and alcohol will remove shellac, especially if it is fresh. It can also help to 'blend' out the shellac mark.
You could test a scrap with shellac and then epoxy to see if the shellac will show, of course. That might take a bit of time, but will give you a better answer than you'll get online.
Nice-looking guitar, BTW.

Cheers
John


Top
 Profile  
 
 Post subject:
PostPosted: Mon Nov 05, 2007 3:50 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13386
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
Chris shellac sticks to epoxy very well unfortunately epoxy does not stick well to shellac.  I would sand the shellac off the sides prior to using an epoxy finishing resin and pore filling.  This would go for the bindings too on the top if they have open pores.


Top
 Profile  
 
 Post subject:
PostPosted: Mon Nov 05, 2007 3:51 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13386
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
Sorry John buddy I did not see your excellent post.


Top
 Profile  
 
 Post subject:
PostPosted: Mon Nov 05, 2007 7:05 am 
Offline
Old Growth Brazilian
Old Growth Brazilian

Joined: Tue Dec 28, 2004 1:56 am
Posts: 10707
Location: United States
We say it and we say it but nobody listens

Epoxy first shellac second

if you plan to pore fill with epoxy, do it before you seal the guitar with shellac. as epoxy does not adhere to shellac well.


Top
 Profile  
 
 Post subject:
PostPosted: Mon Nov 05, 2007 8:22 am 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 03, 2007 7:16 am
Posts: 567
Location: United States
Michael,
No worries, I'm pore filling the back and sides with epoxy. The shellac on the top is to protect from the epoxy. Giving the ole' french polish a try up there.
c


_________________
Chris Oliver
Infinity Luthiers
...in the shop.

live every minute...


Top
 Profile  
 
 Post subject:
PostPosted: Mon Nov 05, 2007 8:39 am 
Offline
Old Growth Brazilian
Old Growth Brazilian

Joined: Tue Dec 28, 2004 1:56 am
Posts: 10707
Location: United States
Good, I did not mean to sound critical. I was actuall quoting one of my all time favorite radio charitures when I wrote "We say it and we say it but nobody listens" That would be Fiber Magee but I beat I am one of the few around here Oldenough to remember the Fiber Magee and Molly radio show.


Top
 Profile  
 
 Post subject:
PostPosted: Mon Nov 05, 2007 8:47 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Mar 19, 2007 7:05 am
Posts: 9191
Location: United States
First name: Waddy
Last Name: Thomson
City: Charlotte
State: NC
Focus: Build
Status: Semi-pro
I think that's Fibber McGee & Molly.  I remember.  Also remember "The Great Gildersleeve".  If you haven't seen it here is a good link to "The Lost Episodes- Volume I".




_________________
Waddy

Photobucket Build Album Library

Sound Clips of most of my guitars


Top
 Profile  
 
 Post subject:
PostPosted: Mon Nov 05, 2007 9:02 am 
Offline
Old Growth Brazilian
Old Growth Brazilian

Joined: Tue Dec 28, 2004 1:56 am
Posts: 10707
Location: United States
1-b 2b's what ever How about Mr Throckmartin Now I reall showing my age


Top
 Profile  
 
 Post subject:
PostPosted: Mon Nov 05, 2007 9:08 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Mar 19, 2007 7:05 am
Posts: 9191
Location: United States
First name: Waddy
Last Name: Thomson
City: Charlotte
State: NC
Focus: Build
Status: Semi-pro
After this nostalgic interlude, we return you to the the original program, "pore filling q (pic)".

_________________
Waddy

Photobucket Build Album Library

Sound Clips of most of my guitars


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 39 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com