| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Did I insert the studs too far into my Ibanez? http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10137&t=54402 |
Page 1 of 1 |
| Author: | IcicleToes [ Fri Sep 10, 2021 2:56 pm ] |
| Post subject: | Did I insert the studs too far into my Ibanez? |
I'm installing a new floyd, and I'd really appreciate some advice on the stud placement. I think I may have hammered these in a bit too far. As you can see, the flute shape of the inserts begins slightly below the guitar body, maybe 2.5mm. What should I be shooting for here? Thanks in advance!   
|
|
| Author: | Conor_Searl [ Wed Sep 15, 2021 3:29 pm ] |
| Post subject: | Re: Did I insert the studs too far into my Ibanez? |
If they're solid, can't you still back the studs out of the threaded insert to raise the action to an appropriate place? |
|
| Author: | phavriluk [ Wed Sep 15, 2021 8:08 pm ] |
| Post subject: | Re: Did I insert the studs too far into my Ibanez? |
Pictures are way too big |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|