This somewhat abused and beat up Guild was brought into my shop for a bridge repair. I recently posted a picture along with a question about the repair and received a lot of good info. The repair went really good but, I noticed a crack in the top.
I might add that the guitar was really dried out and as I hydrated it the crack got more noticeable. If you look in the pictures you can see that it runs from the bridge to the tail piece almost right on the centerline.
Now I did try a drop of thin CA glue and as the picture shows it did wick through. I am worried though that it will damage the finish. I really don’t want to have to refinish it as the guitar is not worth it.
Once again I think I could use some help here with respect to the best way to proceed.
Thanks
Dave
Sent from my iPhone using Tapatalk