Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sun Nov 24, 2024 6:07 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 29 posts ]  Go to page 1, 2  Next
Author Message
PostPosted: Wed Jan 24, 2018 11:09 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
I have a problem - I can't pass up an interesting project, even when my bench is already full. I think the OM is the most versatile acoustic body/scale length combo. Easily fits under your arm, and with the longer 25.4" scale length, has the projection and power that I like.

So when a mid-'90s Martin 000-1 popped up for a deal, I couldn't pass it up. They gave this guitar a 000 designation, but with the long 25.4' scale, its by all measure an OM. These were only made for a few years - solid spruce top, solid mahogany back, mahogany laminate sides, tortoise binding, rosewood bridge and fingerboard. A-frame bracing being the primary difference from a standard 000-18.

Covered with stickers, and wreaking of smoke, this is not a show piece. It's a players guitar, through and through. Clearly there are a few layers to peel back to see what I've really got...


Image

Image


Last edited by dpetrzelka on Fri May 25, 2018 1:48 pm, edited 2 times in total.

Top
 Profile  
 
PostPosted: Wed Jan 24, 2018 11:59 am 
Offline
Koa
Koa

Joined: Mon Jul 11, 2005 5:17 am
Posts: 1011
Location: United States
City: Tyler
State: Texas
There's an old saying "don't pick that scab"



These users thanked the author Glen H for the post: dpetrzelka (Wed Jan 24, 2018 12:39 pm)
Top
 Profile  
 
PostPosted: Wed Jan 24, 2018 12:39 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
Any great approaches to removing SMOKE smell from inside an acoustic?


Top
 Profile  
 
PostPosted: Wed Jan 24, 2018 12:49 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Nov 04, 2010 1:46 pm
Posts: 2150
First name: Freeman
Last Name: Keller
Focus: Build
Status: Amateur
dpetrzelka wrote:
Any great approaches to removing SMOKE smell from inside an acoustic?


The smoke smell would be a deal breaker for me just like a used car or buying a house that had been owned by a smoker. Maybe stripping and refinishing will kill it, you'll probably have to do that anyway to get the stickers off.

While you are at it this is probably a good time to check the neck angle and fix it if its bad (I think the X-1's are Martin's A frame M&T joints) and if its been played that hard I'm going to guess it needs frets. Post some pictures when its done.


Top
 Profile  
 
PostPosted: Wed Jan 24, 2018 1:02 pm 
Offline
Koa
Koa

Joined: Wed Feb 17, 2016 8:54 am
Posts: 854
State: Texas
Country: United States
Focus: Repair
dpetrzelka wrote:
Any great approaches to removing SMOKE smell from inside an acoustic?


Baking soda in the case might work? plus just airing it out might help to eliminate some of it.

In extreme cases I've wiped them down with a very light amount of vinegar a couple of times, while leaving it near a window and it helped quite a bit.


Top
 Profile  
 
PostPosted: Wed Jan 24, 2018 1:22 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
Image


Last edited by dpetrzelka on Fri May 25, 2018 1:51 pm, edited 1 time in total.

Top
 Profile  
 
PostPosted: Wed Jan 24, 2018 1:23 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
Great news is that the previous owner didn't change strings very often, and the bridge plate is in really good shape.

Pickup popped right off - I love removing pickups from acoustics - set them free! I try to remove 2 for every one I install ;)

Image


Last edited by dpetrzelka on Fri May 25, 2018 1:52 pm, edited 2 times in total.

Top
 Profile  
 
PostPosted: Wed Jan 24, 2018 1:25 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
Dan, fortunately it didn't come with a case - smoky, stinky or otherwise. Seems the smoke never comes out of those, and I would have spent weeks trying to freshen it up.

I just have to deal with the instrument...



DanKirkland wrote:
dpetrzelka wrote:
Any great approaches to removing SMOKE smell from inside an acoustic?


Baking soda in the case might work? plus just airing it out might help to eliminate some of it.

In extreme cases I've wiped them down with a very light amount of vinegar a couple of times, while leaving it near a window and it helped quite a bit.


Top
 Profile  
 
PostPosted: Wed Jan 24, 2018 1:44 pm 
Offline
Walnut
Walnut

Joined: Mon Aug 28, 2017 12:18 pm
Posts: 7
First name: David
Last Name: Flis
City: Wyandotte
State: Michigan
Zip/Postal Code: 48192
Country: United States
Focus: Repair
Status: Amateur
May want to give this a try- Sanabul Boxing Glove and Sports Deodorizer (Cedar) or Meister. These have a very powerful sent and would fit through the sound hole. It totally eliminates the smell of any sporting equipment (boxing gloves, hockey bag.)



These users thanked the author DaveFlis for the post: dpetrzelka (Wed Jan 24, 2018 1:49 pm)
Top
 Profile  
 
PostPosted: Wed Jan 24, 2018 2:21 pm 
Offline
Cocobolo
Cocobolo

Joined: Mon Mar 17, 2014 1:27 pm
Posts: 380
First name: john
Last Name: shelton
City: Alsea
State: Oregon
Zip/Postal Code: 97324
Country: usa
Focus: Build
Status: Professional
dpetrzelka wrote:
Any great approaches to removing SMOKE smell from inside an acoustic?

How about Fabreze? It seems to work on other bad smells.


Top
 Profile  
 
PostPosted: Wed Jan 24, 2018 3:30 pm 
Offline
Koa
Koa

Joined: Fri Feb 10, 2017 11:09 pm
Posts: 870
Location: Cowichan Valley, BC, Canada
First name: Conor
Last Name: Searl
City: Duncan
State: British Columbia
Zip/Postal Code: V9L 2E5
Country: Canada
Status: Semi-pro
I bet you get rid of the stickers and the smell is half gone. Soaking the stickers in lighter fluid works great!


Top
 Profile  
 
PostPosted: Wed Jan 24, 2018 4:11 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
Most of the stickers peeled off with ease. I tried warming some slightly with a hairdryer, but that seemed to weaken the sticker material causing more tearing.

I used naphtha to get any stubborn residue, and it cleaned up pretty well.

The top has some interesting bear claw figure. There are, of course some cracks in the back, and one in the top that will bee to be glued and cleated - easy.

This guitar has had a lot of hours of play over the last 20+ years. Some pick wear "mojo" around the sound hole.

Image

Image


Last edited by dpetrzelka on Fri May 25, 2018 2:48 pm, edited 2 times in total.

Top
 Profile  
 
PostPosted: Wed Jan 24, 2018 5:05 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Sep 12, 2010 11:44 am
Posts: 576
First name: Mark
City: Concord
State: NC
Country: USA
Focus: Build
Status: Amateur
Give it a good scrub down with lots of paper towels and toothbrushes soaked w/mineral spirits (dissolves the tars and other condensed smoke components) everywhere you can reach inside and out. I've had the best luck with using lots of activated charcoal granules (aquarium supplies section of your local box store) inside the body in open containers to get rid of smells...try a decomposing field mouse for a tough smell to deal with :roll: Baking soda will work but not as well as the activated charcoal granules. Covering it up with other smells won't do much either.



These users thanked the author Mark Fogleman for the post: dpetrzelka (Wed Jan 24, 2018 6:18 pm)
Top
 Profile  
 
PostPosted: Fri Jan 26, 2018 12:08 am 
Offline
Cocobolo
Cocobolo

Joined: Sat Aug 31, 2013 10:58 pm
Posts: 192
Location: usa
First name: george
Last Name: s
Country: usa
Focus: Repair
Status: Amateur
Conor_Searl wrote:
I bet you get rid of the stickers and the smell is half gone. Soaking the stickers in lighter fluid works great!
Check, naptha/lighter fluid should get the stickers off.

Sent from my SM-G950U1 using Tapatalk



These users thanked the author gxs for the post: dpetrzelka (Tue Jan 30, 2018 9:47 am)
Top
 Profile  
 
PostPosted: Fri Jan 26, 2018 9:43 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Apr 08, 2009 9:34 am
Posts: 3081
Ozium should take care of the smoke smell...might take a few treatments.



These users thanked the author Haans for the post: dpetrzelka (Fri Jan 26, 2018 10:13 am)
Top
 Profile  
 
PostPosted: Fri Jan 26, 2018 10:57 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
Any concern about Ozium around lacquer?

Haans wrote:
Ozium should take care of the smoke smell...might take a few treatments.


Top
 Profile  
 
PostPosted: Fri Jan 26, 2018 11:57 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Apr 08, 2009 9:34 am
Posts: 3081
Looks like not so good of an idea around lacquer...sorry!



These users thanked the author Haans for the post: dpetrzelka (Fri Jan 26, 2018 12:31 pm)
Top
 Profile  
 
PostPosted: Fri Jan 26, 2018 12:33 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
I may try to apply it to a carrier—sponge/paper towel—and place it inside the body on a secure surface (like I do wet sponges for heavy humidification) - we'll see if it will combat some of the odor.

I'll be sure to keep it away from lacquered surfaces.

Haans wrote:
Looks like not so good of an idea around lacquer...sorry!


Top
 Profile  
 
PostPosted: Sun Jan 28, 2018 1:22 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13386
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
Very nicely done Daniel!



These users thanked the author Hesh for the post: dpetrzelka (Mon Jan 29, 2018 4:57 pm)
Top
 Profile  
 
PostPosted: Sun Jan 28, 2018 2:22 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
Thanks everyone.

I ended up using Ozium - sprayed onto a folded paper towel, suspended inside the body, hanging from the strings so that it wouldn't touch the wood. Laid the guitar on it's back, and draped a towel over the sound hole to keep the Ozium fumes in. Smells like its working pretty well to neutralize the previous smoke smell. I'm doing a second overnight treatment, and we'll see whats left of the old smoker.

I do not know if Ozium fumes would effect lacquer, so I'm not yet ready to recommend this for use on a nice guitar. But I was willing to take a risk with one. I did not spray it anywhere near the instrument - only onto a paper towel that I hung inside the instrument.

This is the stuff:
https://www.amazon.com/Ozium-Air-Saniti ... B000CSWCAG

New saddle, fret level/dress (frets are getting pretty low, so I'll refret as soon as I figure out the correct wire to use), dialed in the setup, and it's sounding really good.


Image


Top
 Profile  
 
PostPosted: Sun Jan 28, 2018 8:03 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Apr 08, 2009 9:34 am
Posts: 3081
Glad to hear it's working for you.
We had to use "bombs" of the stuff 3 times over a couple of weeks when the O2 rental company delivered an O2 concentrator that reeked of cigarette smoke. Fortunately, it was not the one I use around the house, but one I used to supply O2 to a compressor to fill tanks.
How someone can have COPD, continue smoking while using oxygen is beyond me.



These users thanked the author Haans for the post: dpetrzelka (Mon Jan 29, 2018 4:56 pm)
Top
 Profile  
 
PostPosted: Mon Jan 29, 2018 4:46 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7376
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
Nice Daniel, looks loads better.

Hans, I'm with you but I have an aunt with COPD that just can't seem to give up the cigerettes - beats me.

_________________
Steve Smith
"Music is what feelings sound like"



These users thanked the author SteveSmith for the post (total 2): Haans (Tue Jan 30, 2018 9:56 am) • dpetrzelka (Mon Jan 29, 2018 4:55 pm)
Top
 Profile  
 
PostPosted: Wed Jan 31, 2018 11:29 am 
Offline
Walnut
Walnut

Joined: Mon Aug 28, 2017 12:18 pm
Posts: 7
First name: David
Last Name: Flis
City: Wyandotte
State: Michigan
Zip/Postal Code: 48192
Country: United States
Focus: Repair
Status: Amateur
How did the Ozium work out?


Top
 Profile  
 
PostPosted: Wed Jan 31, 2018 11:47 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
I'll admit I was very skeptical about the Ozium - blown away with the results.

Ozium was only a couple bucks in town, so it was worth a shot. I did the treatment over three nights - each evening spraying the folded paper towel with a 1 second shot of Ozium (not much) and hanging it on the strings with the guitar laying gently on its back. Covered with a cloth to keep the Ozium fumes inside. Opening up each morning to air out for the day.

Converting a guitar humidifier to deliver the Ozium could be a great option too - something like the Planet Waves that hangs between the strings.

The smoke smell is not entirely gone, but it is so much better—Reduced by 70-80% maybe. Still a faint smell of Ozium, which is its own thing.
The outside is getting much better too - for that I've been using Naphtha, oil soap, and Preservation Polish.


Top
 Profile  
 
PostPosted: Thu Feb 01, 2018 1:43 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13386
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
dpetrzelka wrote:
I'll admit I was very skeptical about the Ozium - blown away with the results.

Ozium was only a couple bucks in town, so it was worth a shot. I did the treatment over three nights - each evening spraying the folded paper towel with a 1 second shot of Ozium (not much) and hanging it on the strings with the guitar laying gently on its back. Covered with a cloth to keep the Ozium fumes inside. Opening up each morning to air out for the day.

Converting a guitar humidifier to deliver the Ozium could be a great option too - something like the Planet Waves that hangs between the strings.

The smoke smell is not entirely gone, but it is so much better—Reduced by 70-80% maybe. Still a faint smell of Ozium, which is its own thing.
The outside is getting much better too - for that I've been using Naphtha, oil soap, and Preservation Polish.


Daniel thanks for reporting that the Ozium works.

I used to buy it and use it when I was a teenager to cover up a smell but I can't remember what it was..... :D Man I'm hungry all of s sudden.... :o



These users thanked the author Hesh for the post: dpetrzelka (Thu Feb 01, 2018 2:13 am)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 29 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 34 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com