Official Luthiers Forum!
http://mowrystrings.luthiersforum.com/forum/

Old 1945 Harmony
http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10137&t=49000		 Page 1 of 1
Author:  Johny [ Mon Feb 13, 2017 5:33 pm ]
Post subject:  Old 1945 Harmony
Hello all, here is my latest project.

My good friend bought a guitar for 3$ in a yard sale. He bargained it from 5$.
That's pretty much what it's worth.

It's been stripped off of its hardware, bridge and fingerboard, and rather crudely.

Image

Image

That's an interesting pin-up decal. Someone seems to have scraped it with a screwdriver.
Image

The back is falling off the guitar. Looks like humidity damage.
Image

Image

But the neck seems to have been played a lot, which is a good sign.

Image


So my plan is to restore that thing to its past glory and to give it a chance to live another couple of decades without falling apart.
It's not worth much, so I'll not put up much money into it.

Hope you like it.
Author:  Johny [ Mon Feb 13, 2017 5:39 pm ]
Post subject:  Re: Old 1945 Harmony
After removing the back, we see the ladder bracing pattern with the big spruce bridge patch that got eaten through by string balls.
Also, I was surprised to see that this guitar is made of solid, not laminated wood. Spruce top with maple back and sides.

Image

Image

Removing the back also allowed to see why that guitar once became unplayable.
That neck block is split side to side.
Image

So I drilled it off.
Image

Image
Author:  Johny [ Mon Feb 13, 2017 5:49 pm ]
Post subject:  Re: Old 1945 Harmony
I made an ebony patch for the bridge pins/string balls.
I added some longitudinal bracing above the bridge location and around the soundhole.
It's really rather small and will hopefully prevent the potato chip deformation ladder braced guitars sometimes develop, without choking the top too much.
I also cleated the centre joint behind the bridge.
You can see I also replaced the neck block with a birch ply one.
Image

Image

Image

Having the longitudinal braces allowed me to shave the other braces a good bit to reduce top mass, especially around the top perimeter.
This is in progress.
Image

Which gives this.
Image

Image
Author:  Johny [ Mon Feb 13, 2017 5:55 pm ]
Post subject:  Re: Old 1945 Harmony
You can see the back braces have come unglued sometime in the past.
Image

So I removed them and reglued them cleanly.
Image

This is while sanding the rim to radius.
Image

And the back is getting glued back on.
Image

The back has no binding, so regluing it left it standing slightly proud at some places, so I had to scrape it a bit and play around with felt tip brown/yellow/red/black pen to camouflage this.
Image

Image

Image

And working some patina back in there also.

Image
Author:  Johny [ Mon Feb 13, 2017 6:00 pm ]
Post subject:  Re: Old 1945 Harmony
Working on the neck.
I routed a truss rod slot, added a maple dowel in the heel to support two brass inserts to convert the neck to a bolt-on.
Image

This is the neck block after routing and drilling.
Image

Tapping the frets in a preslotted and radiused ebony fretboard from LMI.
Image

Gluing the fretboard after dropping a light silicone bed for the truss rod to lay in.
Image

And filing the frets flat and then after crowning and polishing.
Image

Image
Author:  Johny [ Mon Feb 13, 2017 6:08 pm ]
Post subject:  Re: Old 1945 Harmony
The neck angle is a bit off.
Image

Getting it right.
Image

This is the new bridge outline compared to the old one. Hopefully the extra surface will be enough to compensate for the irregular gluing surface the violent removal of the old bridge left.
I messed up a bit by filling the old holes with sawdust and black CA... It was thin enough to wick a bit but not outside the bridge outline.
Image

I used some chalk to mark contact points between the bridge underside and the top. After about an hour or so of marking and scraping, I got a pretty good fit.
Image

Getting the bridge glued on. I was stupid enough to buy just two of these clamps, so I use screws to "clamp" the middle of the bridge. It works surprisingly well, considering it bites in the ebony patch underneath and pulls everything together.
Image
Author:  truckjohn [ Mon Feb 13, 2017 7:24 pm ]
Post subject:  Re: Old 1945 Harmony
That's a beautiful project going on there.

I am glad to see you are making the most of modern technology (bolt on neck, radius the back, radiused fretboard, proper bridge placement for good intonation, etc). That makes these old guitars so much more fun to play.

Thanks
Author:  Johny [ Mon Feb 13, 2017 10:29 pm ]
Post subject:  Re: Old 1945 Harmony
Thanks John!

After gluing the bridge comes some aesthetic touch ups.

I cleaned and repolished the pickguard.
From that:
Image

To that:

Image

And used again child felt tip pen to hide some scratches. Please note the weird decal involving a sombrero and a cactus.
Image

I refurbished some old cheap tuners I had laying around.
Image

After removing the casing and oiling them up, I dulled the finish on them like that:
Image

After shaping the nut, the string layout.
Image

Image

Image
Author:  Johny [ Mon Feb 13, 2017 10:33 pm ]
Post subject:  Re: Old 1945 Harmony
And here is the completed guitar:

Image

Image

Image

Image

Image

Image

Image
Author:  Johny [ Mon Feb 13, 2017 10:45 pm ]
Post subject:  Re: Old 1945 Harmony
This is a short video of my friend having his guitar back.
Should be good for another 72 years or so!
Thanks for watching.



Author:  Ruby50 [ Mon Feb 13, 2017 10:59 pm ]
Post subject:  Re: Old 1945 Harmony
You did a very thorough job and it is better than new - well done. How does it sound?

Ed
Author:  truckjohn [ Tue Feb 14, 2017 8:32 am ]
Post subject:  Re: Old 1945 Harmony
Very nice. Your friend is very lucky.
Author:  Ben-Had [ Tue Feb 14, 2017 11:59 am ]
Post subject:  Re: Old 1945 Harmony
These are so much fun to do. I've done a dozen Harmony re-dos and they always amaze me when done. Try converting your next one to x-brace, makes them sound great.
Author:  JBoogie [ Tue Feb 14, 2017 12:36 pm ]
Post subject:  Re: Old 1945 Harmony
Nice job.

Sent from my SM-G900V using Tapatalk
Author:  John Lewis [ Tue Feb 14, 2017 5:41 pm ]
Post subject:  Re: Old 1945 Harmony
That's worth a bit more than $3 now - good job!
Author:  Christopher Parker [ Thu Feb 16, 2017 9:06 am ]
Post subject:  Re: Old 1945 Harmony
Ben-Had wrote:
These are so much fun to do. I've done a dozen Harmony re-dos and they always amaze me when done. Try converting your next one to x-brace, makes them sound great.

I disagree. I think the latter bracing is what gives these guitars their unique sound. X bracing would rob this kind of guitar of all of its character. If you want X braces, get a Martin or a Martin knockoff. These guitars do something completely different. You can't get a good guitar to sound as good as one of these.

My hat's off to Johnny for making a guitar that was hardly worth fixing into a player. Way to go man!
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/