Official Luthiers Forum!
http://mowrystrings.luthiersforum.com/forum/

I hate working on Vee's....
http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10137&t=48773		 Page 1 of 1
Author:  Chris Pile [ Fri Dec 30, 2016 1:32 am ]
Post subject:  I hate working on Vee's....
And I ain't talking V-Dubs....

Flying V's, Randy Rhoads V's, King V's.... I hate working on them. Lay them on the bench, and when I go to pick up the neck for a measurement the nearest point slides to me and right off the bench. Every stinking time. I have to turn the darn thing at right angles to the bench to check action at the nut.

THEN.... When it comes time to play the darn thing, you can't put it in your lap. Putting the farthest leg between your knees won't work, either. Must get a strap. It's a pain. I wanna reach back in time and smack Ted McCarty or whoever for designing such a POS shape, and NOT actually handing one to see what it does in the real world.

Have I told you I hated working on V's?
Author:  Hesh [ Fri Dec 30, 2016 5:27 am ]
Post subject:  Re: I hate working on Vee's....
I can relate, what a stupid design.....

About ten years ago a family in the area brought in an old G*bson case to the store that used to be located where we are. Turns out that this was their Dad's guitar that even though he didn't play it had been given to him as payment when the G*bson factory contracted him to do electrical work on the facility and then had no money to pay the bill. So they gave this guy a Flying V and he put it under his bed for 50 years or so and never touched it.

It was serial number 001P or the first prototype of the V. It was initially listed for $100,000 but sat around for 6 mouths at that price. It eventually sold for $65K which is still a pretty hefty price for a guitar that can't be played without a strap...

I was thinking about digging up Leo yesterday and shooting him for his truss rod access originally requiring loosening the neck bolts. Chris if you want any help digging up the designer of the V and shooting him too let me know bro. :)
Author:  Glen H [ Fri Dec 30, 2016 9:17 am ]
Post subject:  Re: I hate working on Vee's....
Yea, but they look cool right?
Author:  Chris Pile [ Fri Dec 30, 2016 10:19 am ]
Post subject:  Re: I hate working on Vee's....
Quote:
Yea, but they look cool right?


Some guys pulled it off.... Lonnie Mack, Albert King, Hendrix....
Author:  J De Rocher [ Fri Dec 30, 2016 11:04 pm ]
Post subject:  Re: I hate working on Vee's....
I've never had any desire to own one, but I did get to see Lonnie Mack play a tiny club between Ann Arbor and Detroit (possibly in Dearborn) in the early 90s. He defintely pulled it off.
Author:  pgroneck [ Sat Dec 31, 2016 12:00 am ]
Post subject:  Re: I hate working on Vee's....
Works well for Michael Schenker


Sent from my iPhone using Tapatalk
Author:  Chris Pile [ Sat Dec 31, 2016 12:37 am ]
Post subject:  Re: I hate working on Vee's....
Quote:
Works well for Michael Schenker


He has a roadie....
Author:  FL6 [ Sat Dec 31, 2016 6:49 am ]
Post subject:  Re: I hate working on Vee's....
I've never owned or held one but I imagined them to be that way but I still want one, you know, because they look awesome.
Author:  dzsmith [ Sat Dec 31, 2016 10:07 am ]
Post subject:  Re: I hate working on Vee's....
I made one. Looks cool, but I cannot play it sitting down.

I made a couple Explorers too. They sit perfectly on the leg while sitting. Only problem is you can't set it up against anything because of the curved bottom and a case for it is monster-sized.
Author:  Freeman [ Sat Dec 31, 2016 12:30 pm ]
Post subject:  Re: I hate working on Vee's....
Last year I got to install a Sustainiac in a Vee. It already had a active pickup so it ends up with two batteries, the pcb and all the other electronic crap and the driver thing in the neck position

Image

If the battery dies in the middle of a gig you are toast so I put a little volt meter and rocker switch in the compartment so you can easily check them

Image

New pickguard with the switches

Image

Image

Truly the guitar from hell
Author:  Chris Pile [ Sat Dec 31, 2016 2:18 pm ]
Post subject:  Re: I hate working on Vee's....
Quote:
Only problem is you can't set it up against anything because of the curved bottom and a case for it is monster-sized.


It's true. But they look great, don't they? Comfy to play, too.
Author:  jfmckenna [ Fri Jan 06, 2017 10:03 am ]
Post subject:  Re: I hate working on Vee's....
Yeah but you know what? With a strap they are some of the most comfortable guitars to play imho.

Maybe someone some day will invent a Patented Flying Vee leg rest... You can make a fortune kid.
Author:  Quine [ Fri Jan 06, 2017 12:16 pm ]
Post subject:  Re: I hate working on Vee's....
Glen H wrote:
Yea, but they look cool right?


The first guy to play one looked cool. The second guy....cliche
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/