| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Adding a rosette after the soundhole is cut http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10137&t=48287 |
Page 1 of 1 |
| Author: | gxs [ Sat Sep 17, 2016 5:48 pm ] |
| Post subject: | Adding a rosette after the soundhole is cut |
I am reassembling a late '30's Washburn. It is in too many pieces to be collectable, but a fun project. The sound hole had a ring and binding, but the binding is long gone and only pieces of the ring remained. I expanded the sound hole just enough to get it round again, and rebound it. I'd like to add a ring, maybe a couple while I am at it. Anyone have tips for cutting the ring channel and getting it true to the sound hole when the sound hole is already cut? Thanks. GS |
|
| Author: | Clinchriver [ Sat Sep 17, 2016 5:59 pm ] |
| Post subject: | Re: Adding a rosette after the soundhole is cut |
Make a "removable plug" to fit the existing sound hole and route away. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|