| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Any ideas or is it any good..Brazilian rosewood? http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10137&t=47960 |
Page 1 of 1 |
| Author: | cablepuller1 [ Wed Jun 29, 2016 3:23 pm ] |
| Post subject: | Any ideas or is it any good..Brazilian rosewood? |
Hi Friend got this guitar cheap to learn on but it needs some work.. I chuckled at first about the condition and brought it home for repair. .thing is, now I look at it I think it may be a decent classic guitar and perhaps it Brazilian rosewood. . Anyone know anything about these guitars please and value Repairs needed are -bridge reglue,new tuners It's a giannini gn60   
|
|
| Author: | Hesh [ Wed Jun 29, 2016 3:36 pm ] |
| Post subject: | Re: Any ideas or is it any good..Brazilian rosewood? |
Are those steel strings... no wonder it needs a bridge reglue. Giannini's are not valuable and were imported to many places including the US. It could be BRW but back in the day even cheap guitars used BRW... go figure.... |
|
| Author: | cablepuller1 [ Wed Jun 29, 2016 3:37 pm ] |
| Post subject: | Re: Any ideas or is it any good..Brazilian rosewood? |
Hesh wrote: Are those steel strings... no wonder it needs a bridge reglue. Giannini's are not valuable and were imported to many places including the US. It could be BRW but back in the day even cheap guitars used BRW... go figure.... Thanks Hesh Yes they are steel strings..it's all but pulled the bridge off Still might be worth fixing I guess |
|
| Author: | rlrhett [ Wed Jun 29, 2016 5:26 pm ] |
| Post subject: | Re: Any ideas or is it any good..Brazilian rosewood? |
If it is BRW, I would seriously consider buying it from your friend and re-topping it. After all, when are you going get a chance to build a BRW guitar? Re-carve the neck to your liking, correct any neck angle issues, make a new fingerboard. Not suggesting it would be easy, but what better use of that BRW body? Sent from my iPhone using Tapatalk |
|
| Author: | Barry Daniels [ Wed Jun 29, 2016 5:58 pm ] |
| Post subject: | Re: Any ideas or is it any good..Brazilian rosewood? |
It looks like it got wet and molded. Check inside to see what kind of condition it is. Also check whether it is has a laminated top and back. If so, the value of the BRW will be zip. |
|
| Author: | Clinchriver [ Wed Jun 29, 2016 6:53 pm ] |
| Post subject: | Re: Any ideas or is it any good..Brazilian rosewood? |
The inside looks a lot like mahogany so probably plywood |
|
| Author: | truckjohn [ Thu Jun 30, 2016 10:04 pm ] |
| Post subject: | Re: Any ideas or is it any good..Brazilian rosewood? |
From here at least.... It doesn't look like Brazilian rosewood... What I see in the pic - the back looks laminated. |
|
| Author: | philosofriend [ Mon Aug 01, 2016 11:39 am ] |
| Post subject: | Re: Any ideas or is it any good..Brazilian rosewood? |
Gianninis often use BRZ Rosewood in places which make no sense. I've got one with back braces made of it. Some Gianinis sound much better than others, even then have little market value. I had this one small classic with a quiet but amazingly beautiful balanced tone..... I miss it. I've never seen one with solid back or sides. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|