| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Re-setting acoustic neck http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10137&t=47495 |
Page 1 of 1 |
| Author: | surveyor [ Mon Mar 21, 2016 11:05 am ] |
| Post subject: | Re-setting acoustic neck |
I was going make my own needle setup  for injecting steam into a guitar neck and was wondering if using a "perforated" needle with holes in the side would be OK.? I found those for about $10. Or would it be better to just get the one already made from Stew Mac?
|
|
| Author: | Pat Foster [ Mon Mar 21, 2016 12:26 pm ] |
| Post subject: | Re: Re-setting acoustic neck |
If it were me, I'd go for a hole at the end, though ones out the side should work. I've made my needles from an air pump needle for inflating basketballs and also thin tubing from the local hardware store. No need for anything fancy here. Pat |
|
| Author: | surveyor [ Mon Mar 21, 2016 2:00 pm ] |
| Post subject: | Re: Re-setting acoustic neck |
OK , I'll see what's laying around the house. I've got an old pressure cooker for steam. I was given an old Yamaha G-70 that was found on side of the road, just thought it would be a challenge to see if I could get it to play again. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|