Any pictures of the grain orientation? I'm fussy about using QS dust, whenever possible.
Alex
| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Mahogany Dust http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10137&t=46236 |
Page 1 of 1 |
| Author: | fumblefinger [ Tue Aug 25, 2015 12:49 am ] |
| Post subject: | Mahogany Dust |
I'm in the process of moving some equipment from the garage to the new shop. Pulled the dust collection bag off of the belt/disk sander and proceeded to dump it in the trash can. Woah! I suddenly realized that it was mostly (99.8%) mahogany dust. Can't guarantee the purity, but it all looks the same color and consistency. I'd made a few neck supports and cauls the lazy way and just held the piece on the end of the belt sander to get the contour. So if anyone needs some dust for a fill, shoot me a PM and I'll send you some. ( I think that's a gallon size bag) |
|
| Author: | Chris Pile [ Tue Aug 25, 2015 5:19 am ] |
| Post subject: | Re: Mahogany Dust |
Yes, even such as this has value. |
|
| Author: | dzsmith [ Tue Sep 08, 2015 7:05 pm ] |
| Post subject: | Re: Mahogany Dust |
Ah-choo! |
|
| Author: | sdsollod [ Tue Sep 08, 2015 7:42 pm ] |
| Post subject: | Re: Mahogany Dust |
That would fill some big holes... |
|
| Author: | Alex Kleon [ Wed Sep 09, 2015 6:09 am ] |
| Post subject: | Re: Mahogany Dust |
Any pictures of the grain orientation? I'm fussy about using QS dust, whenever possible. Alex |
|
| Author: | fumblefinger [ Wed Sep 09, 2015 11:28 pm ] |
| Post subject: | Re: Mahogany Dust |
Ever seen the grain direction on Japanese Oak? Pretty similar. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|