| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Bigsby for Silvertone http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10137&t=46105 |
Page 1 of 1 |
| Author: | florioguitars [ Wed Jul 29, 2015 12:32 pm ] |
| Post subject: | Bigsby for Silvertone |
Hello I am looking for any suggestions for the best bigsby or the like for a Silvertone 1457. I do not currently have the guitar so not sure of the existing bridge setup. Thank you. |
|
| Author: | Mike2E [ Fri Jul 31, 2015 7:38 am ] |
| Post subject: | Re: Bigsby for Silvertone |
Have you checked Bigsby? Silvertone looks like a flat thin body. Check here. http://www.bigsby.com/vibe/resources/faqs/ B3 or B5. I have fitted 2 B7 type to arch tops and replaced the bridges with rollers because the the strings get destroyed with sharp edge type |
|
| Author: | Hesh [ Fri Jul 31, 2015 4:23 pm ] |
| Post subject: | Re: Bigsby for Silvertone |
Be keen to check out string spacing on any trem offering - Silvertones, many of them have unusually narrow necks and we don't want our strings hanging over the edge of the neck either. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|