| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Reset on Laminated neck http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10137&t=44538 |
Page 1 of 1 |
| Author: | Steve Davis [ Mon Nov 10, 2014 1:23 pm ] |
| Post subject: | Reset on Laminated neck |
Theres are a couple of pics on the building forum of an archtop Im planning to fix. It needs a reset but has a Laminated neck.. Anyone have experience of this? did the steam unglue the neck Lams? These are the laminate that run all the way to Attachment: P1000435 (640x640) (600x600).jpg the heel
|
|
| Author: | B. Howard [ Tue Nov 11, 2014 7:14 am ] |
| Post subject: | Re: Reset on Laminated neck |
Archtop necks are tougher to steam out than flat tops. I recently did a Hofner bass and there was some slight separation of the laminated and stacked heel. |
|
| Author: | Steve Davis [ Tue Nov 11, 2014 4:13 pm ] |
| Post subject: | Re: Reset on Laminated neck |
I decided to go for it all went pretty well...i was a bit concerned as this was a laminated back also Attachment: P1000454 (600x338).jpg Attachment: P1000452 (600x338).jpg The back was fine, the tenon had split a bit but glued back up well...nothing too pretty in there There was a "truss" rod of sorts in there also! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|