Official Luthiers Forum!
http://mowrystrings.luthiersforum.com/forum/

Few Parlours and Dreadnoughts
http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10130&t=42256		 Page 1 of 1
Author:  jecaisale [ Sun Dec 22, 2013 9:38 am ]
Post subject:  Few Parlours and Dreadnoughts
Hi everyone.

Firstaval i want to apologize for my english, which is wery weak, and i hope you will understand my.

My name is Aleksandar and i am from Serbia. I do some acoustic guitar buildings for a past few years. I usually bild parlour guitar(model 00 according to Gibson L00) and Dreadnought(D28 shape), and the wood for building guitars is usually mahagony for back and sides, also but rarely use walnut and maple for back and sides, neck is mahagony or maple or laminated mahagoni-maple-walnut, also For top use spruce or Red Canadian Cedar.
Here is some pictures of my guitars...
Next guitar will take pictures from beginning and post them in new topic.
Parlour natur
Image
Image
Image
Image
Image

Parlour sunburst
Image
Image
Image
Image
Image
Parlour with trapeze tailpiece
Image
Image
Image
Image
Dreadnought with 3 pice back
Image
Image
Image
Image
Image
Dreadnought
Image
Image
Image
Image
Image
Image
Image
Dreadnought maple, with 3 piece back and 2 piece sides
Image
Image
Image
Image
Image
Image
Image
Author:  dzsmith [ Sun Dec 22, 2013 10:05 am ]
Post subject:  Re: Few Parlours and Dreadnoughts
Very nice Aleksander!
I like the clean lines. Very elegant!
Author:  Alex Kleon [ Sun Dec 22, 2013 11:43 pm ]
Post subject:  Re: Few Parlours and Dreadnoughts
Nice work, Aleksander! I am looking forward to seeing how you build your guitars. Thanks for sharing your pictures with us!

Alex
Author:  jecaisale [ Mon Dec 23, 2013 2:29 pm ]
Post subject:  Re: Few Parlours and Dreadnoughts
Thank you very much.
Soon i will begin to make dreadnought guitar, according to Gibson J45 and is gona be cutaway. Back and sides will be mahagony, top spruce and for neck don't know yet...
I will open new topic about building that guitar...
Author:  Mike Baker [ Thu Feb 06, 2014 6:48 pm ]
Post subject:  Re: Few Parlours and Dreadnoughts
Nice work! Beautiful guitars!
Author:  Mark Chinworth [ Thu Feb 06, 2014 10:11 pm ]
Post subject:  Re: Few Parlours and Dreadnoughts
Very good work, my friend. I especially like the walnut back wedge on the dreadnought and the continued design in the neck. I look forward to seeing your next guitar.


Sent from my iPad using Tapatalk
Author:  Beth Mayer [ Fri Feb 07, 2014 1:02 pm ]
Post subject:  Re: Few Parlours and Dreadnoughts
Beautiful work! Welcome:)
Author:  jecaisale [ Sat Feb 15, 2014 2:28 pm ]
Post subject:  Re: Few Parlours and Dreadnoughts
Thank you all. I said that will put pictures from beginning of build J45, but i forgot to take pictures in all processes :oops: . Will do that on next, i promise.
Here is finished J45
ImageImageImageImageImageImageImage
Author:  sdsollod [ Sat Feb 15, 2014 2:38 pm ]
Post subject:  Re: Few Parlours and Dreadnoughts
Nicely done! [clap] [clap] [clap]
Author:  Nick Royle [ Sun Feb 16, 2014 5:08 pm ]
Post subject:  Re: Few Parlours and Dreadnoughts
Excellent work! Wish I'd built them! :D
Author:  Joe Sallis [ Thu Feb 20, 2014 8:10 am ]
Post subject:  Re: Few Parlours and Dreadnoughts
you have a unique style, Alexsander. Very well built guitars. Where do you sell them?
Author:  jecaisale [ Thu Feb 20, 2014 12:09 pm ]
Post subject:  Re: Few Parlours and Dreadnoughts
Thanks guys.
I sell them in my country and it is going so slow, it is very small country. Tried to sell on Ebay but the big problem is Paypal, not working in my country. I can pay through paypal but can't receive money, the only way to receive money is Skrill but that is not so popular service in world.
That is the only but very big problem.
Someday it will come paypal an i hope it will be a different story.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/