| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Tail piece made of ivroid http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10130&t=36353 |
Page 1 of 1 |
| Author: | Wendell Harvey [ Tue May 01, 2012 7:27 am ] |
| Post subject: | Tail piece made of ivroid |
I cut the tail end of my OM yesterday and cut out a piece of Ivroid to fit. Tapered of course. When I placed the Ivroid in the end I was shocked to discover it was much thinner then the side rosewood. Now I either use a scraper and cut down sides or ??? Could I add a second layer of the .060 Ivroid and will they glue up good? Then use a scraper to level things? Mad at myself for not looking at thickness in the first place. Help. W. Bros. Guitars PS Sorry to be on the wrong forum, Im new here What kind of glue to keep these two pieces of Ivroid together??? This is an added question. |
|
| Author: | Barry Daniels [ Tue May 01, 2012 10:13 am ] |
| Post subject: | Re: Tail piece made of ivroid |
Sure, you can glue in two layers. Scuff the surfaces up for the glue to get a good grip. By the way, you should post these kind of questions in the Guitar Building Forum. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|