***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Nov 21, 2024 8:19 pm


Board index » Mandolin - Mandola - Ukulele Forum

All times are UTC - 5 hours


Forum rules


Same rules apply to all forums at the Luthiers Forum.




Post new topic Reply to topic  Page 1 of 1
  [ 7 posts ] 
  Print view Previous topic | Next topic 
Author Message
surveyor
PostPosted: Sat Jul 20, 2019 4:16 pm 
Offline
Cocobolo
Cocobolo

Joined: Sat Dec 28, 2013 10:06 am
Posts: 256
First name: Mike
Last Name: Spector
City: ORANGE
State: TX
Zip/Postal Code: 77632
Country: USA
Focus: Build
Status: Amateur
Maybe someone here has been down this road. I'm starting a couple of tenor ukes for Christmas gifts and was looking at the Petros Ukes site. He uses a carbon fiber reinforcement rod and so I thought I would too. I saw where Stew Mac sells a rectangular shaped 18" rod for About $20 , then looked on E-Bay and saw those round ones (5mm dia.) for a little over a $1/ft. Wouldn't one of those work ?
Top
 Profile  
 
Chris Pile
PostPosted: Sat Jul 20, 2019 4:19 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5821
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
Probably. But most ukes have no truss rods at all, and probably don't need them.

_________________
"Act your age, not your shoe size" - Prince
Top
 Profile  
 
powdrell
PostPosted: Sat Jul 20, 2019 5:00 pm 
Offline
Mahogany
Mahogany

Joined: Mon Dec 22, 2008 7:22 pm
Posts: 88
First name: doug
Last Name: powdrell
City: hilo
State: big island
Focus: Build
Status: Amateur
Rectangular 1/8" x 3/8" carbon on edge or sandwich 1/8"+ wood in center of neck full length......

many sources for carbon rods.......
Top
 Profile  
 
Aaron O
PostPosted: Sun Jul 21, 2019 5:49 pm 
Offline
Cocobolo
Cocobolo

Joined: Mon Apr 14, 2008 3:20 am
Posts: 376
Location: Kapolei HI
First name: Aaron
Focus: Build
Status: Semi-pro
Most of the guys I know install them - most of us build tenors.
Discussion on the topic here; a little dated, but still relevant. https://forum.ukuleleunderground.com/sh ... r%2C+proud
Top
 Profile  
 
Quine
PostPosted: Mon Jul 22, 2019 11:45 am 
Offline
Koa
Koa
User avatar

Joined: Thu Dec 18, 2008 11:42 am
Posts: 1135
Location: Hudson, MA
First name: Kevin
Last Name: Quine
City: Hudson
State: MA
Country: Usa
Focus: Build
Status: Amateur
powdrell wrote:
Rectangular 1/8" x 3/8" carbon on edge or sandwich 1/8"+ wood in center of neck full length......

many sources for carbon rods.......



Ditto on these. I don't think ukuleles require a reinforcement, but I install one on tenor ukes for insurance. Rectangular shapes are much easier to route and install than a rod would be.
Top
 Profile  
 
Allen McFarlen
PostPosted: Mon Jul 22, 2019 3:07 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Fri Dec 01, 2006 6:44 pm
Posts: 471
Location: Australia
First name: Allen
Last Name: McFarlen
City: Mt. Sheridan
State: Qld.
Zip/Postal Code: 4868
Country: Australia
Focus: Build
Status: Professional
I don't know of any pro builder that doesn't install a CF truss rod. Mine is 4mm x 6mm.

_________________
Allen R. McFarlen
Barron River Guitars & Ukuleles
Facebook
Cairns, Australia
Top
 Profile  
 
surveyor
PostPosted: Mon Jul 22, 2019 5:28 pm 
Offline
Cocobolo
Cocobolo

Joined: Sat Dec 28, 2013 10:06 am
Posts: 256
First name: Mike
Last Name: Spector
City: ORANGE
State: TX
Zip/Postal Code: 77632
Country: USA
Focus: Build
Status: Amateur
I ordered a couple of 3x8mm. Thanks for the info. So far they seem to be fun to build. Also on the plus side, I'm repurposing some otherwise non useable material left over from guitar building. Seems like a plan--- build several guitars, then build a uke with left overs.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 7 posts ] 

Board index » Mandolin - Mandola - Ukulele Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 45 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com