Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
Taking existing top measurements http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10128&t=39336 |
Page 1 of 1 |
Author: | Piiman [ Wed Feb 13, 2013 12:07 pm ] |
Post subject: | Taking existing top measurements |
what tool/instrument would a guy use to measure the top graduations on a finished mandolin? |
Author: | Dave Stewart [ Wed Feb 13, 2013 1:43 pm ] |
Post subject: | Re: Taking existing top measurements |
Traditionally a "hacklinger" gauge, although these days people are experimenting, including electronic versions like this http://www.stewmac.com/shop/Tools/Calip ... &xsr=39957 |
Author: | Arnt Rian [ Thu Feb 14, 2013 6:32 am ] |
Post subject: | Re: Taking existing top measurements |
I have this tool, and I recommend it highly. Mine is an early version, without the USB interface thing, so I use it as a "traditional" caliper, and jot down numbers in a notebook. It is still very convenient, compared to a Hacklinger for example, but connecting it directly to a computer opens up new possibilities. The guy who makes them is quite active over on Mandolin Cafe, and I understand he is also developing some interesting looking new software for mapping archtop plates, to go with the tool. |
Author: | Dave Stewart [ Thu Feb 14, 2013 8:32 am ] |
Post subject: | Re: Taking existing top measurements |
Arnt, interesting to hear you're using the magic probe. I think it's developed into a great tool. I'd be surprised if Liam wouldn't "upgrade" you to one of the newer versions if you asked him. |
Author: | Arnt Rian [ Thu Feb 14, 2013 9:40 am ] |
Post subject: | Re: Taking existing top measurements |
Hi Dave, perhaps he would. He told me when I got the first one I was his first customer in Norway (or was it Europe?), it wouldn't surprise me if I'm still his only customer in Norway, perhaps that makes me "special" enough for an upgrade, huh? ![]() |
Author: | Piiman [ Fri Feb 15, 2013 1:14 am ] |
Post subject: | Re: Taking existing top measurements |
that looks really good |
Author: | lsnyman [ Fri May 10, 2013 11:34 pm ] |
Post subject: | Re: Taking existing top measurements |
Hi Arnt Dave is correct. I will of course upgrade you if you want to get rid of the sketchbook. The new software is now complete, so now you can turn those numbers into a full color contour map. Also, you do not need to own a MAG-ic Probe in order to use the PRO software. A manual entry option is added. ![]() |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |