Official Luthiers Forum! :: View topic - Back in the Shop

Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/

Back in the Shop http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10128&t=34136	Page 1 of 1

Author:	Chris Oliver [ Fri Nov 04, 2011 4:00 pm ]
Post subject:	Back in the Shop
I have been away from building for some time now. My new wrap-around pickin' porch has taken far too long although is nearly complete. If we could get the concrete steps to pass inspection we would be ready to install our stair rail and be done with it. Since we are waiting for our concrete contractor to get done fooling around so we can tear what he has done out and have another contractor come in and do the job correctly I have had some time to get back in the shop. Here is an a model I started last year and finally go back to this week. It is nearly in the white (should be this weekend). It will be getting a two-color sunburst of which I will post some pics here and more in my shop blog.

Author:	WudWerkr [ Sat Nov 05, 2011 9:08 am ]
Post subject:	Re: Back in the Shop
Beautifull work , I love the look of that wood . As for the contractors , good luck , Been there done that and decided to move to an are where the inspections are not required . where I live , no permit needed , I can do my own work , two basic basic requirements are looked for . 1. poops gotta drain down hill 2 the black wire will ring your chimes !

Author:	Chris Oliver [ Sat Nov 05, 2011 9:46 am ]
Post subject:	Re: Back in the Shop
WudWerkr wrote: Beautifull work , I love the look of that wood . As for the contractors , good luck , Been there done that and decided to move to an are where the inspections are not required . where I live , no permit needed , I can do my own work , two basic basic requirements are looked for . 1. poops gotta drain down hill 2 the black wire will ring your chimes ! s There is a lot to be said for less big brother.... they're just looking out for my best interests right? Afterall, they're from the gubment and there to help! That maple is local and is slipmatched.

Author:	Chris Oliver [ Sun Nov 06, 2011 1:13 pm ]
Post subject:	Re: Back in the Shop
In the white and sounding awesome. Attachment: 2011-11-06_11-51-50_50-1.jpg Attachment: 2011-11-06_12-05-13_600-1.jpg

Author:	ChuckH [ Tue Nov 08, 2011 7:15 am ]
Post subject:	Re: Back in the Shop
WudWerkr wrote: Beautifull work , I love the look of that wood . As for the contractors , good luck , Been there done that and decided to move to an are where the inspections are not required . where I live , no permit needed , I can do my own work , two basic basic requirements are looked for . 1. poops gotta drain down hill 2 the black wire will ring your chimes ! Beautiful Mandolin. Bet you can't wait to hear he sing. That's funny Big Jim. My Father was a plumber/pipefitter in Chicago area and I remember one time he told me the only thing you need to know about plumbing is? Crap don't run up hill, Fridays payday and the boss is an @$$hole. Funny the things we remember when we were kids. I realize now that it's a common saying, but back then I thought he was so wise.

Author:	Bryan Bear [ Tue Nov 08, 2011 2:56 pm ]
Post subject:	Re: Back in the Shop
ChuckH wrote: My Father was a plumber/pipefitter in Chicago area and I remember one time he told me the only thing you need to know about plumbing is? Crap don't run up hill, Fridays payday and the boss is an @$$hole. I heard it a little different. The third one was "don't bite your nails. . ." Perhaps I heard it from a self employed plumber

Author:	Chris Oliver [ Tue Nov 08, 2011 3:59 pm ]
Post subject:	Re: Back in the Shop
I can't believe this thread has gone to the crapper. Maybe these pictures will flush it out. Attachment: 2011-11-06_18-51-23_312-1.jpg Attachment: 2011-11-07_07-50-06_360-1.jpg Attachment: 2011-11-07_07-49-45_127-1.jpg

Author:	WudWerkr [ Tue Nov 08, 2011 4:59 pm ]
Post subject:	Re: Back in the Shop
Lookin goooddd my friend keep us in the loop , Cant wait to see it finished.

Author:	Chris Oliver [ Tue Nov 08, 2011 5:12 pm ]
Post subject:	Re: Back in the Shop
I was just toying with you ... Attachment: 2011-11-07_09-14-29_107-1.jpg Attachment: 2011-11-07_09-15-41_930-1.jpg

Author:	Chris Oliver [ Tue Nov 22, 2011 8:10 pm ]
Post subject:	Re: Back in the Shop- A model complete (audio)
I finished that A model on 11-11-11.. oddly enough at 11 am central. I got in the hands of a couple pros that night and the next day at the festival here in town. It received great reviews and many comments on the 'new car' smell. Due to the timing of its completion, Adam Steffey recommended I name it 'Eleven'. Seems reasonable to me... so here is 'Eleven'. This is an A model using f5 scale and fretboard. I moved the bridge back to the middle of the instrument (and it's carved to have it there not just moved). The top is sitka, back sides and neck hard maple, neck and tail blocks are old growth mahogany, fretboard and fretboard extender are African blackwood, ebony adjustable bridge and headstock veneers, tailpiece is Bill James engraved with 'Infinity Luthiers', celluloid nitrate bindings on body and fretboard, cow bone nut, MOP fret markers, headstock logo and fretboard service mark, Grover tuners with perloid buttons, 2 color sunburst (amber/tobacco) with hand-rubbed finish. I rings like a bell and has unnaturally long sustain. Here is a short (3 a.m.) clip of Mark Fowler of Truman's Ridge messing around. Listen to this, then think about how good he is fresh! I'll be creating a youtube video of the construction of this mando and background will be a lot more of Mark's excellent test drive. click me--> short clip Attachment: AmodelSitka-back.jpg Attachment: AmodelSitka11-11-11-front.jpg

Author:	Chris Oliver [ Sun Dec 18, 2011 4:52 pm ]
Post subject:	Re: Back in the Shop
I finally got some better pics of the mando while on holiday. Attachment: Amodel-11-11-11-b.jpg Attachment: Amodel-11-11-11-a.jpg Attachment: Amodel-11-11-11-c.jpg Attachment: Amodel-11-11-11-e.jpg

Author:	Ken Jones [ Wed Jan 18, 2012 4:04 pm ]
Post subject:	Re: Back in the Shop
Beautiful mandolin, Chris! I'm experiencing the joys of binding an F5 at the moment Next several will be A's for sure... Hope you're well, my friend. Let's get together before the next GAL get-together! Peace. Ken

Author:	Chris Oliver [ Wed Jan 18, 2012 4:15 pm ]
Post subject:	Re: Back in the Shop
Thanks Ken! Good to hear from you.... btw... checked your email since August? Let me know if you have any plans of driving through the midwest. Otherwise I'll be here in Springfield and in Nashville periodically. Binding an F..... nice. Can't wait to see it! Post here when you are done.

Page 1 of 1	All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/