Official Luthiers Forum!
http://mowrystrings.luthiersforum.com/forum/

Electric " Base Mandola " 4 string
http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10128&t=26515		 Page 1 of 1
Author:  WudWerkr [ Sat Mar 13, 2010 10:39 am ]
Post subject:  Electric " Base Mandola " 4 string
I am kicking around building a solid body 1 piece neck/ body electric "Base" mandola
4 string . I have hard maple large enough to do this in a mandola size . I have down loaded diadarrio scale specs and string sizes chart . Any Suggestions would be helpfull . Basically it is a Mini Base

Ever been done ? is there a thread of one I can look at ? Am I totally nuts? ok scratch that last one , I am! laughing6-hehe HUSH CHUCK !!! laughing6-hehe
Author:  martinedwards [ Sat Mar 13, 2010 5:55 pm ]
Post subject:  Re: Electric " Base Mandola " 4 string
well, I made a mandostrat.........

go for it!!

Image
Author:  WaddyThomson [ Sun Mar 14, 2010 12:19 am ]
Post subject:  Re: Electric " Base Mandola " 4 string
Really? I thought it was a Ukeacaster! :D
Author:  MRS [ Sun Mar 14, 2010 1:10 am ]
Post subject:  Re: Electric " Base Mandola " 4 string
A mandola is only about 20 1/4" scale. Never heard of a bass mandola. Are you maybe talking about a mandobass? I know D'addario has mandobass strings. if so that has about a 42" scale. Would be pretty hard fingering notes in an electric style instrument position...Mike
Author:  WudWerkr [ Sun Mar 14, 2010 8:50 am ]
Post subject:  Re: Electric " Base Mandola " 4 string
wonder if a guy could use those strings and reduce them down to a little longer scale than 20-1/4 the other question would be the fret board spacing . alot to consider .

I bet those strings would be to big ? have to check the guage .

Can it be done yes can it be done effectivly to make a quality sounding "mini bass" there is million dollar question

did some looking at the MandoBass that Gibson did in 1920's I think this can be done . well I am open to ANY suggestions that anyone might have on this project .
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/