All Ive ever used is the stamped and have been ok with them . This is a great question . I look forward to someone answering this who has expperience with both.
![[:Y:]](./images/smilies/smiley20.gif "Thumbs Up")
| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Tailpiece Selection? http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10128&t=26022 |
Page 1 of 1 |
| Author: | JJ Donohue [ Fri Feb 12, 2010 7:53 am ] |
| Post subject: | Tailpiece Selection? |
I see both stamped (lighter) as well as cast (heavier) tailpieces offered. What experience do builders have with each and why would one choose one over the other? TIA |
|
| Author: | WudWerkr [ Fri Feb 12, 2010 8:06 am ] |
| Post subject: | Re: Tailpiece Selection? |
All Ive ever used is the stamped and have been ok with them . This is a great question . I look forward to someone answering this who has expperience with both.
|
|
| Author: | Haans [ Fri Feb 12, 2010 9:36 am ] |
| Post subject: | Re: Tailpiece Selection? |
I bet I've tried every T/P out there, and the only one that works for me is the James. It is an outstanding T/P and used by most quality builders. Course Bill is a good friend... 
|
|
| Author: | WudWerkr [ Fri Feb 12, 2010 9:56 am ] |
| Post subject: | Re: Tailpiece Selection? |
Hans do u have a link to his site ?? would very much like to see it |
|
| Author: | JJ Donohue [ Fri Feb 12, 2010 10:11 am ] |
| Post subject: | Re: Tailpiece Selection? |
Here's a link to the T/P http://www.firstqualitymusic.com/p_JTT-STG.aspx?source=FROOGLEFEED I'm still interested in knowing why one is preferred over another. |
|
| Author: | Haans [ Fri Feb 12, 2010 10:20 am ] |
| Post subject: | Re: Tailpiece Selection? |
Guys, just go to http://www.axinc.net. That will put you right on Bill's website. JJ, the tin canny that Gibson used all those years is too ringy for my taste, and if you lace something to isolate the strings, you have the same as the James. Charlie Derrington tried to get Bill to lighten them up. but solid mechanical whiz that Bill is, he knows when to say no. The tailpieces isolate themselves by using O rings to both lock the rear hinged cover and keep the strings from rattling. The strings hold the O rings in place. |
|
| Author: | Arnt Rian [ Fri Feb 12, 2010 5:58 pm ] |
| Post subject: | Re: Tailpiece Selection? |
Another vote for the James tailpiece, they are great! However, for mandolin styles beside Gibson type arch tops, you might find other types more appropriate. Check out the selection at Greg Boyd, for example http://gregboyd.com/accessories.html?category_key=5&family=Mandolins |
|
| Author: | sebastiaan56 [ Fri Feb 12, 2010 6:16 pm ] |
| Post subject: | Re: Tailpiece Selection? |
Does anyone make their own tailpieces? Ive seen some very clunky home made ones and prefer something a bit slimmer. |
|
| Author: | MRS [ Sun Feb 14, 2010 12:54 am ] |
| Post subject: | Re: Tailpiece Selection? |
Weber offers an unmarked universal tailpiece thats fits standard screw hole placement. It a nice bridge. |
|
| Author: | Pete Brown [ Wed Feb 17, 2010 10:32 pm ] |
| Post subject: | Re: Tailpiece Selection? |
I've always hankered after something along the lines of the elegant tailpiece developed by archtop builder Bob Benedetto, but have stalled when it's come to working out an effective method of anchoring the loop end mandolin strings. Attachment: benedetto1.jpg Attachment: benedetto2.jpg Any ideas? |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|