Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Nov 21, 2024 4:54 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 8 posts ] 
Author Message
PostPosted: Thu Feb 16, 2023 5:11 pm 
Offline
Mahogany
Mahogany

Joined: Sat Mar 02, 2019 2:15 am
Posts: 51
First name: Patrick
Last Name: Wirta
City: Eagle
State: Idaho
Country: USA
Focus: Build
Status: Amateur
I am in the process of building a couple of telecasters, I generally build acoustics, and wanted to understand how to go about routing the perimeter of the body with a hand router. I also have a table router as well. I want to avoid blowing out the bouts and horn. There is pattern to trimming the back and top overhang on an acoustic guitar, is there one for solid body electrics?

Thanks in advance.


Top
 Profile  
 
PostPosted: Fri Feb 17, 2023 7:30 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13385
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
I don't think there is a pattern for Tele styles that I've seen Patrick. But what I would do is take the acoustic pattern, I used to do this when I was building and tape it to the wall over my binding router jig and duplicate the direction on the pattern. For say the inside of the horn I would approach it as if it's the other side of the instrument as per the pattern.

I might be inclined to draw a Tele shape and then highlight my cuts and add a directional arrow.

Climb cuts, what we call this are cheap insurance against an expensive accident so good going for thinking of this.


Top
 Profile  
 
PostPosted: Fri Feb 17, 2023 9:10 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Aug 19, 2005 4:02 am
Posts: 3263
Location: The Woodlands, Texas
First name: Barry
Last Name: Daniels
Climb cuts can also grab the workpiece and launch it across a room so you have to be really careful about that. The main thing is to take very shallow cuts of no more than 1/8" deep and make multiple passes. I find that a router table is safer because it allows you to have both hands on the workpiece and you don't have to worry about the router tipping.

In regards to direction of cut, I like to envision the direction of the rotation of the spinning bit and then look carefully at the work piece and determine where the bit might catch the grain and pull out a chunk. Those are the areas that you should reverse the direction of cut. Take a pencil and place arrows on the guitar body to show the proper direction for each section.

Another consideration is the router itself. A router with a 1/2" diameter collet will be MUCH more stable and you will get a smoother cut compared to a 1/4" collet.


Top
 Profile  
 
PostPosted: Fri Feb 17, 2023 2:58 pm 
Offline
Mahogany
Mahogany

Joined: Sat Mar 02, 2019 2:15 am
Posts: 51
First name: Patrick
Last Name: Wirta
City: Eagle
State: Idaho
Country: USA
Focus: Build
Status: Amateur
Using Bill Cory’s diagram, I transferred it to the telecaster shape. Any thing I missed? I think I will do this on the router table so I have two hands on the piece. Sorry for the blurry image, Apple doesn’t make it easy to resize images without a third party app.


You do not have the required permissions to view the files attached to this post.



These users thanked the author PatrickW for the post: Hesh (Sat Feb 18, 2023 4:40 am)
Top
 Profile  
 
PostPosted: Fri Feb 17, 2023 5:02 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2660
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
Looks good.
Just note that the router bit in a hand-held rotates the opposite direction when it is mounted in a table router.
Hope that makes sense.

_________________
wah
Wah-wah-wah-wah
Wah



These users thanked the author dzsmith for the post: PatrickW (Fri Feb 17, 2023 9:10 pm)
Top
 Profile  
 
PostPosted: Fri Feb 17, 2023 7:34 pm 
Offline
Koa
Koa

Joined: Tue Jan 22, 2008 8:57 pm
Posts: 762
Location: Austin, Texas
I see no mention of just exactly how you plan to do this routing...I'll assume you're going to have a template attached to your wood, which begs the question is said patter sized for the use of a collar on your router or is it made for the use of a flush cut bit?

Either way I'd suggest attaching the pattern then using it as a guide to carefully use a jigsaw or bandsaw to get real close to the pattern so as to not be taking off too much material at once which will be beneficial in numerous ways not the least of which being able to control a hand held router much better.

I'd definitely prefer a 1/2" shank router bit...


Top
 Profile  
 
PostPosted: Fri Feb 17, 2023 9:12 pm 
Offline
Mahogany
Mahogany

Joined: Sat Mar 02, 2019 2:15 am
Posts: 51
First name: Patrick
Last Name: Wirta
City: Eagle
State: Idaho
Country: USA
Focus: Build
Status: Amateur
I have a template attached to the body blank and plan to use a 1/2” shank pattern bit to trim the perimeter.

Edit: using the diagram from Bill Cory’s book did the trick to successfully rout the perimeter of the tele body without blowing anything out.


Top
 Profile  
 
PostPosted: Wed Mar 01, 2023 10:50 pm 
Offline
Contributing Member
Contributing Member

Joined: Sat Sep 14, 2013 9:46 pm
Posts: 784
Location: Napa Valley
First name: David
Last Name: Foster
City: Napa
State: CA
Zip/Postal Code: 94558
Country: USA
Focus: Build
Status: Amateur
It's also all about baby steps. Be sure and cut off excess with band saw. And then take only a little bit at a time with flush cutter.

_________________
https://www.instagram.com/fostinoguitars/
https://www.facebook.com/PuraVidaUkuleles/


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 23 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com