Official Luthiers Forum!
http://mowrystrings.luthiersforum.com/forum/

Burl Tele
http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10123&t=52577
Page 1 of 1

Author:  martintaylor [ Fri Oct 25, 2019 9:43 pm ]
Post subject:  Burl Tele

My Burl Tele is done! Coolabah Burl - resin body, Maple neck Rosewood fretboard, Golden Age pickups. The burl is heavy (and I mean, heavy like the heaviest Les Pauls heavy) but with a good strap (or sitting down) it is workable. I'll attempt to get something recorded in the next few days.

Attachment:
IMG_4486.jpg


Attachment:
IMG_4489.jpg


Attachment:
IMG_4490.jpg


Attachment:
IMG_4498.jpg


Attachment:
IMG_4499.jpg


Attachment:
IMG_4500.jpg


Attachment:
IMG_4502.jpg


Attachment:
IMG_4503.jpg

Author:  Chris Pile [ Fri Oct 25, 2019 11:37 pm ]
Post subject:  Re: Burl Tele

Absolutely unique!

Author:  alan stassforth [ Sat Oct 26, 2019 10:50 am ]
Post subject:  Re: Burl Tele

Speechless!!!
Alan

Author:  Barry Daniels [ Sat Oct 26, 2019 10:30 pm ]
Post subject:  Re: Burl Tele

Wow, Martin, that is great!

Do you finish right over the resin?

Author:  martintaylor [ Sat Oct 26, 2019 11:22 pm ]
Post subject:  Re: Burl Tele

Barry Daniels wrote:
Wow, Martin, that is great!

Do you finish right over the resin?


Thanks Barry, yes, the Nitro goes straight over the resin and the burl. The challenge is that you want a very smooth finish on the resin to get the best clear result but if it is too smooth the Nitro can peel off. I sanded the body to 1200 but had to come back to 800 to get it right.

Author:  Barry Daniels [ Sun Oct 27, 2019 9:29 am ]
Post subject:  Re: Burl Tele

I love that you can see the spikes of the burl, but you don't have to feel them.

Author:  sdsollod [ Sun Oct 27, 2019 1:15 pm ]
Post subject:  Re: Burl Tele

How cool is that?!

Author:  banjopicks [ Tue Oct 29, 2019 9:08 am ]
Post subject:  Re: Burl Tele

That is fabulous!!!!!!!!!

Author:  martintaylor [ Sat Nov 02, 2019 8:25 am ]
Post subject:  Re: Burl Tele

One of my students gave the guitar a run. Here's the vid.
https://www.youtube.com/watch?v=zyu9VS932ks

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/