| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Can you stain oil-finished wood? http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10123&t=50969 |
Page 1 of 1 |
| Author: | MyelinSheath [ Fri Sep 14, 2018 11:59 pm ] |
| Post subject: | Can you stain oil-finished wood? |
I’ve got a neck from a 2013 Charvel pro mod guitar that I’m putting on one of the bodies I constructed. It’s a one-piece maple neck with what I believe is an oil finish. I’m not fond of the look of maple necks and prefer the look of rosewood or ebony. If I wanted to stain the fretboard, would I have to strip the finish off, then stain it, or could I just stain it like it is? |
|
| Author: | B. Howard [ Mon Sep 17, 2018 6:18 am ] |
| Post subject: | Re: Can you stain oil-finished wood? |
Yes, you will need to strip the finish off to apply the stain then refinish to protect the stain. Going to be a PITA with the frets in.... getting the finish off all the way to the frets so you don't leave white lines of maple after the stain. IMHO, find a rosewood neck if it bothers you. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|