| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| P Bass neck demissions http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10123&t=50395 |
Page 1 of 1 |
| Author: | dofthesea [ Wed Mar 07, 2018 2:56 pm ] |
| Post subject: | P Bass neck demissions |
Oops sorry for the double post. Does any one have the dimensions for a stock P bass neck with a 34" scale? I need to order up neck stock and want to be sure that 4" x 30" x 7/8 will work. |
|
| Author: | Sandywood [ Fri Mar 09, 2018 10:24 am ] |
| Post subject: | Re: P Bass neck demissions |
I don't have a template but I know that the neck is longer than 30". Need at least 33". That leaves only about 1/8" extra. (estimate- I don't know exact) Even without a template I'd want my stock to be at least 4" x 3/4" x 48". (ears for the head if needed and I think they will be) You'd be better off IMO getting a template before ordering your stock. You may decide 4.5" x 3/4" x 34" is what you want. Hope this helps David. |
|
| Author: | Jules [ Thu Apr 12, 2018 4:13 pm ] |
| Post subject: | Re: P Bass neck demissions |
I built a Ric bass with a 33.25 scale. From the tip of the head to the bottom of the fretboard, it's a little over 32". I've got a P bass neck drawing (no dimensions on it) but it is to scale. It measures a little over 33" from the head to the end of the fretboard. |
|
| Author: | dofthesea [ Mon Apr 16, 2018 9:13 pm ] |
| Post subject: | Re: P Bass neck demissions |
Jules any chance of getting a copy of the drawing ? I can pay postage or copy fees no problem, |
|
| Author: | Jules [ Sat May 19, 2018 1:12 pm ] |
| Post subject: | Re: P Bass neck demissions |
dofthesea wrote: Jules any chance of getting a copy of the drawing ? I can pay postage or copy fees no problem, Check you messages... |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|