| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| New hollowbody project need advice http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10123&t=43939 |
Page 1 of 1 |
| Author: | Ckyslowsky [ Wed Aug 06, 2014 9:58 pm ] |
| Post subject: | New hollowbody project need advice |
I am building a hollowbody similar to the languedoc.. I have built a few guitars and I know this is going to be a challenge.. Can anyone tell me the type of Neck pocket joint to use? Also I am wondering if I can use acoustic back a sides.. Is there any tonal difference in carving my own back? Any help would be appreciated.. |
|
| Author: | James T [ Tue Aug 26, 2014 9:37 am ] |
| Post subject: | Re: New hollowbody project need advice |
Paul Languedoc uses a deep tenon neck on the G2 . As far as the side bending , that's a matter of choice . If you want to lean towards a more acoustic based tone then yes |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|