Official Luthiers Forum!
http://mowrystrings.luthiersforum.com/forum/

Tele + PRS SC + LP in the blender
http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10123&t=41802		 Page 1 of 1
Author:  cactus [ Wed Oct 30, 2013 3:34 pm ]
Post subject:  Tele + PRS SC + LP in the blender
Hi.
I'm sure it's been done but I wanted to see what the average shape was between the LP, PRSsc & Tele72. Knob and switch placement is averaged, too. Took 3 measurements every 2 degrees, divided by 3 and made a node there. First approach was done at the bridge, but the cutaway area couldn't handle it. So I moved the center point to the "waist" of the guitars. And gave the cutaway horn its own measurement approach. Also the Tele body sat about 0.5" higher than the other two.

The end result is very polite and boring. :)
I won't be doing anything with it but if anybody wants the file or anything let me know.

B
Author:  nyazzip [ Wed Oct 30, 2013 3:55 pm ]
Post subject:  Re: Tele + PRS SC + LP in the blender
Quote:
The end result is very polite and boring.


yup. just like i have always felt about PRS
Author:  dzsmith [ Wed Oct 30, 2013 5:39 pm ]
Post subject:  Re: Tele + PRS SC + LP in the blender
Interesting, I did not know the overall sizes are so similar.
It makes you wonder who copied who.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/