| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| "Reliable" CNC Service http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10123&t=38073 |
Page 1 of 1 |
| Author: | QueZee [ Thu Oct 25, 2012 5:21 pm ] |
| Post subject: | "Reliable" CNC Service |
Can anyone recommend a reliable CNC company who’s happy to do individual guitar parts, rather than the whole guitar? We just need to have someone CNC a compound radius frertboard. Have e-mailed countless companies, zero interest. |
|
| Author: | Tony_in_NYC [ Thu Oct 25, 2012 6:20 pm ] |
| Post subject: | "Reliable" CNC Service |
I have used Andy Birko. He's a member here and a great guy. There are other members who will do it as well. Posted from the future using Tapatalk |
|
| Author: | Chris Pile [ Thu Oct 25, 2012 6:55 pm ] |
| Post subject: | Re: "Reliable" CNC Service |
Bob Garrett here on the OLF did some great work for a guy here in Wichita. |
|
| Author: | Don Williams [ Thu Oct 25, 2012 8:14 pm ] |
| Post subject: | Re: "Reliable" CNC Service |
Andy Birko is taking on some new customers, and he does nice work. I'm sure he can and would handle that easily. |
|
| Author: | Bob Garrish [ Sat Oct 27, 2012 5:42 pm ] |
| Post subject: | Re: "Reliable" CNC Service |
Chris Pile wrote: Bob Garrett here on the OLF did some great work for a guy here in Wichita. Garrish  I think the laminated body I made for that guy is still the prettiest thing I've made from wood...I'm keeping that lamination combo in my mental files for future use. I will be doing CNC work again soon (in a couple weeks, when my new machine arrives), but I only do prototype and small production run stuff, so no one-off normal components. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|