| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Strings popping out of bridge slots when playing http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10123&t=37591 |
Page 1 of 1 |
| Author: | Irving [ Thu Aug 30, 2012 12:11 pm ] |
| Post subject: | Strings popping out of bridge slots when playing |
Anyone ever filed these slots a hair deeper on a tune o matic bridge? Was thinking about using a nut file. |
|
| Author: | Chris Pile [ Thu Aug 30, 2012 12:20 pm ] |
| Post subject: | Re: Strings popping out of bridge slots when playing |
Don't use a nut file. Have you got any Die Sinker files, or needle files? Even a small half-round or very small rat tail file will work. |
|
| Author: | Irving [ Thu Aug 30, 2012 12:21 pm ] |
| Post subject: | Re: Strings popping out of bridge slots when playing |
Chris Pile wrote: Don't use a nut file. Have you got any Die Sinker files, or needle files? Even a small half-round or very small rat tail file will work. Why no nut file? |
|
| Author: | Quine [ Thu Aug 30, 2012 12:23 pm ] |
| Post subject: | Re: Strings popping out of bridge slots when playing |
Maybe ease up with your right hand. No more windmills man! |
|
| Author: | Irving [ Thu Aug 30, 2012 12:26 pm ] |
| Post subject: | Re: Strings popping out of bridge slots when playing |
Quine wrote: Maybe ease up with your right hand. No more windmills man! Haha. No trust me, it needs some attention. It's on a guitar I just finished building. I used a resonator tailpiece and I don't think it has quite enough angle to keep good tension on strings at the bridge. I'll post a pic in a minute. The strings pop out quite easily. Never happens on any of my other guitars no matter how hard I play. |
|
| Author: | Irving [ Thu Aug 30, 2012 12:35 pm ] |
| Post subject: | Re: Strings popping out of bridge slots when playing |
|
|
|
| Author: | Irving [ Thu Aug 30, 2012 12:37 pm ] |
| Post subject: | Re: Strings popping out of bridge slots when playing |
|
|
| Author: | Mike Baker [ Thu Aug 30, 2012 1:01 pm ] |
| Post subject: | Re: Strings popping out of bridge slots when playing |
Irving wrote: Chris Pile wrote: Don't use a nut file. Have you got any Die Sinker files, or needle files? Even a small half-round or very small rat tail file will work. Why no nut file? I would assume because the nut file is much more expensive. As to notching the tuneomatic, I do it all the time, especially if the fretboard radius and the radius of the bridge are different. They are meant to be notched, to adjust the bridge radius, or to adjust string spacing at the bridge, although many people don't bother. FWIW, I use a nut file for this. Smooth out with abrasive cord or sand paper. |
|
| Author: | dzsmith [ Sat Sep 01, 2012 8:13 am ] |
| Post subject: | Re: Strings popping out of bridge slots when playing |
Irving wrote: Quine wrote: Maybe ease up with your right hand. No more windmills man! Haha. No trust me, it needs some attention. It's on a guitar I just finished building. I used a resonator tailpiece and I don't think it has quite enough angle to keep good tension on strings at the bridge. I'll post a pic in a minute. The strings pop out quite easily. Never happens on any of my other guitars no matter how hard I play. The angle does look pretty shallow. Is it possible to run the strings under instead of over the tailpiece? If you file the bridge slots, I would file it angled toward the tailpiece similar to filing a nut to minimize buzzing. Beautiful guitar! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|