Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
Pine Solid Bodies http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10123&t=37018 |
Page 1 of 1 |
Author: | klooker [ Thu Jul 05, 2012 3:46 pm ] |
Post subject: | Pine Solid Bodies |
Does anyone here have experience with pine solid body guitars? As far as I know, some old Tele's were pine but that's it. I have some very large 8/4 pine boards that could produce some 1-piece solid bodies. Just curious about people's opinions regarding pine. Thanks, Kevin Looker |
Author: | John Sonksen [ Thu Jul 05, 2012 4:38 pm ] |
Post subject: | Re: Pine Solid Bodies |
My experience is it gums up your tools pretty fast. With that said I'd definitely try it. I want to make a barn wood tele in the future which would be much less substantial than pine. |
Author: | Chameleon [ Thu Jul 05, 2012 7:54 pm ] |
Post subject: | Re: Pine Solid Bodies |
I used pine for the body of my last guitar. Worked fine, you just have to be really careful if you're using a router. Does not route very well. I'm pretty sure that's the only reason it's not used more on commercial guitars. My pickup cavities and neck pocket routed just fine, but when I routed the body shape I got some really bad chip out, even going with the grain. I'd consider sanding the shape instead of routing. Also don't use a safety planer to thickness it. You'll see why if you do. |
Author: | Ken McKay [ Fri Jul 06, 2012 8:19 pm ] |
Post subject: | Re: Pine Solid Bodies |
![]() |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |