| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Tailpeices. http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10123&t=36948 |
Page 1 of 1 |
| Author: | Irving [ Wed Jun 27, 2012 1:15 pm ] |
| Post subject: | Tailpeices. |
I was planning to use this tailpiece with a gotoh tune o matic bridge: http://www.stewmac.com/shop/Bridges,_ta ... piece.html However, because of my body size, it will only leave about 1 inch between it and the bridge. I would prefer closer to 2 inches. Anyone think that this resonator tailpiece could be used with a 2" thick flat top hollow body electric? http://www.stewmac.com/shop/Bridges,_ta ... piece.html Might offer a bit of a unique sound and look. |
|
| Author: | Chameleon [ Wed Jun 27, 2012 1:40 pm ] |
| Post subject: | Re: Tailpeices. |
Found this under the reviews for that first taipiece: "Nice For Modifications Used for a modification to a 1999 PRS Hollowbody II. It fit beautifully over the carve of the body, although I had to slightly widen the center hole to allow the strap button screw to thread cleanly. The metal works cleanly if you need to shorten and re-thread the arms with a tap. I plan to buy more for future projects." I'm sure the resonator one would work just fine but if you like the first one, (which I like better) sounds like you can make it work for your purposes. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|