Official Luthiers Forum!
http://mowrystrings.luthiersforum.com/forum/

How big is your rod?
http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10123&t=33519
Page 1 of 1

Author:  VirgilGuitar [ Wed Sep 14, 2011 1:49 pm ]
Post subject:  How big is your rod?

Wanted to open up a can of worms here and see what everyone's opinion is on cutting your trussrods. I am about to do this for the second time, but wanted to hear different opinions on this - This is for the Silver Willow and it's a traditional trussrod (Gibson style with a nut at the end) and I realize you cut these to size like I did on my last one, but I wanted to hear different theories as to how long it should be (And perhaps "Why")- so where does the lug end up approximately for a 22 fret guitar?
12th fret?
The neck joint?

Thanks!

Author:  alan stassforth [ Wed Sep 14, 2011 5:58 pm ]
Post subject:  Re: How big is your rod?

I would say longer is better,
so around the joint.

Author:  VirgilGuitar [ Wed Sep 14, 2011 6:00 pm ]
Post subject:  Re: How big is your rod?

alan stassforth wrote:
I would say longer is better,
so around the joint.

Thanks Alan - yeah, I ended up cutting it so it's about an inch into the heel.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/