| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Source for 3 position switch http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10123&t=33253 |
Page 1 of 1 |
| Author: | ernie [ Fri Aug 19, 2011 11:22 am ] |
| Post subject: | Source for 3 position switch |
A friend wants me to replace the 3 way switch on his chinese epiphone which he just bought. Anyone know of a good source for these switches ?? must be made in usa or other high quality production source thanks. |
|
| Author: | Marcus [ Fri Aug 19, 2011 11:26 am ] |
| Post subject: | Re: Source for 3 position switch |
http://www.stewmac.com/shop/Electronics,_pickups/Components:_Switches_and_knobs.html |
|
| Author: | nutsdan [ Sat Aug 20, 2011 2:19 am ] |
| Post subject: | Re: Source for 3 position switch |
I don't know if StewMacs are US made. Try mojotone.com or allparts.com. They have Switchcraft toggles in all configurations. |
|
| Author: | ernie [ Sun Aug 21, 2011 6:57 pm ] |
| Post subject: | Re: Source for 3 position switch |
Thanks . Have bought before from allparts. Have a lot of stuff from s mac but they are pricey |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|