| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Fillin' with epoxy? http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10123&t=32791 |
Page 1 of 1 |
| Author: | WindyCityBluesBox [ Thu Jul 07, 2011 5:40 pm ] |
| Post subject: | Fillin' with epoxy? |
Hello all, Ive recently made some pretty horrific router mistakes on my project (realized that I had routed the wrong area). This is my first build so its a learning experience but I was wondering if I could fill these up with epoxy? My biggest concern is that using epoxy to fill routed out material will damage the sound quality. Also, these were just wire channels, not like a full pickup cavity or anything. I will be gluing a piece of wood over this area when the routing is finished so Im also wondering if I can maybe just leave it? -Alex |
|
| Author: | Chris Pile [ Thu Jul 07, 2011 7:12 pm ] |
| Post subject: | Re: Fillin' with epoxy? |
Easier to fill it with wood... epoxy isn't known for it's great tone. |
|
| Author: | Robbie_McD [ Thu Jul 07, 2011 9:09 pm ] |
| Post subject: | Re: Fillin' with epoxy? |
If you post some pix it might be helpful..... |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|