| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Tremolo suggestions http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10123&t=30561 |
Page 1 of 1 |
| Author: | jimmysux [ Sun Jan 02, 2011 6:47 pm ] |
| Post subject: | Tremolo suggestions |
I am in the process of building a PRS style guitar (build thread is open if you haven't seen it) Anyway, I haven't messed with building a trem guitar before, will any trem work or will I have to get a PRS style? I don't feel like spending 200.00 on the trem to be honest, the guitar is just going to be for me anyway. If I can fit a strat style or something in there I will as they are far more abundant and cheaper. |
|
| Author: | Ti-Roux [ Sun Jan 02, 2011 7:09 pm ] |
| Post subject: | Re: Tremolo suggestions |
But... you already routed for the bridge. ??? |
|
| Author: | jimmysux [ Sun Jan 02, 2011 8:22 pm ] |
| Post subject: | Re: Tremolo suggestions |
Sure did. I bought the template set, was a template for a trem, so I routed it. after further inspection, I think a variety of trems will fit. |
|
| Author: | Ti-Roux [ Sun Jan 02, 2011 8:51 pm ] |
| Post subject: | Re: Tremolo suggestions |
So you can put anything that will fit. Just recheck your neck angle if you use a different one than on your plan. You should rout for the bridge you choose. Not rout and then choose a bridge that fits. That's an illogicality. |
|
| Author: | jimmysux [ Sun Jan 02, 2011 10:43 pm ] |
| Post subject: | Re: Tremolo suggestions |
PRS and Fender style trems seem like they interchange. I may just get a PRS trem though. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|