| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Tear out on a Mahogany body http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10123&t=29543 |
Page 1 of 1 |
| Author: | Mitch Johnson [ Mon Oct 18, 2010 3:46 pm ] |
| Post subject: | Tear out on a Mahogany body |
Hello all. This is one of my first posts in the electric section. I've been spending most of my time building acoustics. A couple weeks ago my aunt had called wanting to order a guitar for my Uncle. He lives in Arizona, far from where I am, but we were together at a family reunion of sorts a few weeks ago and he really wanted me to build him a Telecaster. So my aunt was going to surprise him with one for Christmas.....Well, the surprise lasted a few days before she blurted out that she had already ordered him a guitar. She was digging for details and it just came out.... Anyway, I have been traveling to my parents place where my shop access is over the last couple of weeks to get it done. Its a 3 and half hour drive so I am trying to get as much work done while I'm here as possible...Today I was flush trimming my pattern to the body and had a couple spots were I either got to aggressive or careless (Also very nervous). So there is a couple spots of some pretty severe tearout. My question is...Does anyone know of a quality putty that would match mahogany well, be sandable, and take a stain or finish. I'll be attempting the see through yellow,butterscotch or whatever you want to call the old tele finish. I forgot to mention that this is going to be a thinline with a chambered body. Here's a few pictures.... |
|
| Author: | Mitch Johnson [ Mon Oct 18, 2010 4:11 pm ] |
| Post subject: | Re: Tear out on a Mahogany body |
http://www.acehardware.com/product/inde ... 1304637883 Ace is really the only hardware store in town and this is what I found...Anyone know if the latex base will be cause for any problems when finishing with lacquer? |
|
| Author: | StevenWheeler [ Mon Oct 18, 2010 5:51 pm ] |
| Post subject: | Re: Tear out on a Mahogany body |
Mitch, I would just sand those sections until the tearout is gone. Just reshape the areas so you don't have a flat spot. Any filler you use in a hole that size will show under a transparent finish. Steve |
|
| Author: | Mitch Johnson [ Mon Oct 18, 2010 7:01 pm ] |
| Post subject: | Re: Tear out on a Mahogany body |
Thanks for the suggestion Steve. I made a patch for the deeper one and it's in the shop drying. I think I will take your advice about sanding the other to blend it in. Mitch |
|
| Author: | Mustang_jt [ Mon Oct 18, 2010 8:17 pm ] |
| Post subject: | Re: Tear out on a Mahogany body |
concur with the sanding. I was going to mention gluing in a chip into the deeper one, but sounds like you already did that. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|