Official Luthiers Forum!
http://mowrystrings.luthiersforum.com/forum/

Need help for my ES-175 clone
http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10123&t=29496		 Page 1 of 1
Author:  Ricardo [ Fri Oct 15, 2010 12:36 pm ]
Post subject:  Need help for my ES-175 clone
I'm almost done - need to attach pickguard and do setup and the finish needs work (with the return of warm weather). I'm not sure I have the pickup rings installed correctly. Should the thick side of the rings face the neck or endpin?
Attachment:
clone.jpg
Author:  Mustang_jt [ Fri Oct 15, 2010 3:28 pm ]
Post subject:  Re: Need help for my ES-175 clone
Thick side of the pickup rings goes toward the bridge
Author:  Ricardo [ Fri Oct 15, 2010 5:01 pm ]
Post subject:  Re: Need help for my ES-175 clone
Thanks John. Got them on right now. Got to say those 57 Classic pickups are powerful!
Author:  Mustang_jt [ Fri Oct 15, 2010 6:28 pm ]
Post subject:  Re: Need help for my ES-175 clone
looks like you did a really nice job! you should post more pics.
Author:  Ricardo [ Fri Oct 15, 2010 6:48 pm ]
Post subject:  Re: Need help for my ES-175 clone
John I will, but next spring when I can get the topcoats on and polished. I ran out of warm weather since my spray booth is outside. Rich
Author:  Ken C [ Fri Oct 15, 2010 7:32 pm ]
Post subject:  Re: Need help for my ES-175 clone
Yumm...I want one!
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/