Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
Is my list complete? http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10123&t=29197 |
Page 1 of 1 |
Author: | tgenza [ Thu Sep 23, 2010 3:39 pm ] |
Post subject: | Is my list complete? |
Hello. I've been reading and preparing for my first electric build. I built a kit prior. I have a shoppingcart full at StewMac of the following except for the pups, bridge and tailpiece that I got elsewhere. I'm currently still shopping for a body blank. I think I have everything else. Any input would be appreciated. Thanks. Medium Fretwire Gibson 24-3/4" Scale Fingerboard - Rosewood Electric Guitar Neck Blank - Plain maple Gotoh Oval Knob Tuners - Chrome, 6-in-line Black Pickguard Material - 0.059" Black Tusq XL Nut Strap Buttons - Chrome Conductive Copper Tape - 3/4" wide Gibson Truss Rod Wiring Kit, with Toggle Switch, Pots, Capacitor, output jack 2 Dome Knob - Chrome, 6mm shaft 2 epiphone 57 Humbuckers Tune O Matic Bridge and Lock tail piece Jack Plate Pickup Height Screws Humbucker Pickup Height Springs Plastic Mounting Rings For Humbucking Pickups Humbucker Mounting Ring Screws Pickguard Screws Neck Mounting Plate Traditional Fender-style String Retainers Franklin Titebond Glue |
Author: | DennisK [ Thu Sep 23, 2010 10:13 pm ] |
Post subject: | Re: Is my list complete? |
Only things I see maybe missing are fretboard marker dots (face and side) and finishing supplies. Good luck with the build, and post pictures when you get going |
Author: | tgenza [ Thu Sep 23, 2010 10:18 pm ] |
Post subject: | Re: Is my list complete? |
It's my own design similar to a Gibson SG |
Author: | tgenza [ Thu Sep 23, 2010 10:19 pm ] |
Post subject: | Re: Is my list complete? |
fret markers! yes thanks! |
Author: | peters instruments [ Thu Sep 23, 2010 10:31 pm ] |
Post subject: | Re: Is my list complete? |
what are you planning to finish it with? you;ll need to think about that at some point, although it can wait a little while. you may want a cover for you truss rod unless you are going to make one. |
Author: | tgenza [ Fri Sep 24, 2010 6:55 am ] |
Post subject: | Re: Is my list complete? |
My plan is to stain it and the use tung oil. I did that with the kit I put together and was rather happy with it. |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |