| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Truss rods? http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10123&t=27248 |
Page 1 of 1 |
| Author: | Mustang_jt [ Tue May 04, 2010 4:46 pm ] |
| Post subject: | Re: Truss rods? |
I had the same idea on some guitars, it works ok, but kind of a pain to remove the pickup. I have decided to go back to puting it at the nut end. Frank Hartung guitars puts an access at the 21st fret to adjust the truss rod. |
|
| Author: | John Platko [ Wed May 05, 2010 9:42 am ] |
| Post subject: | Re: Truss rods? |
Filippo Morelli wrote: Answered my own question. Didn't realize this existed: http://www.stewmac.com/shop/Truss_rods/Adjustable_truss_rods/Hot_Rod_Truss_Rods/Spoke_Nut_Hot_Rod.html Attachment: 1016_1lg.jpg Looks like if I get the placement right, it can fit under the trim ring. Filippo I've done it. A rod with and LMI like hex nut works too. |
|
| Author: | Edward Taylor [ Thu May 06, 2010 9:20 pm ] |
| Post subject: | Re: Truss rods? |
That seems like a good place for the adjuster if its compatible with the guitar design. I have just been putting it at the heel of the neck, kinda a pain for adjusting. |
|
| Author: | StevenWheeler [ Fri May 07, 2010 6:53 am ] |
| Post subject: | Re: Truss rods? |
Try a search on Gotoh SAT-1 and SAT-2. That is their side adjust trussrod for eletric 1 and 2 piece necks. Steve |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|