| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Pickup placement on multiscale http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10123&t=27169 |
Page 1 of 1 |
| Author: | Edward Taylor [ Tue Apr 27, 2010 11:05 am ] |
| Post subject: | Pickup placement on multiscale |
Is it necessary to place the pickup on an angle like the frets? Or can you just put it straight? I have a regular sized humbucker and was planning on placing it at an angle, but it looks like it may be too short to catch the top and bottom strings if placed on an angle. Thoughts appreciated. |
|
| Author: | martinedwards [ Mon May 17, 2010 6:23 am ] |
| Post subject: | Re: Pickup placement on multiscale |
I've only built one multiscale electric. it's a 5 string bass, but the principle is the same. I put the pups in straight and it looks fine! |
|
| Author: | alan stassforth [ Sat May 29, 2010 1:05 pm ] |
| Post subject: | Re: Pickup placement on multiscale |
straight, definitely, otherwise the pole pieces won't line up with the strings. |
|
| Author: | Edward Taylor [ Sat Jun 05, 2010 1:07 pm ] |
| Post subject: | Re: Pickup placement on multiscale |
alan stassforth wrote: straight, definitely, otherwise the pole pieces won't line up with the strings. Arg, too late. We will see how it sounds. Otherwise I guess I can route another space right beside it for another pickup and have them side by side to cover up the mistake. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|