| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Removing super glue http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10123&t=25555 |
Page 1 of 1 |
| Author: | Matt Borland [ Mon Jan 18, 2010 2:39 pm ] |
| Post subject: | Removing super glue |
When I was fretting my guitar project I accidentally spilled some stew-mac thin super glue on the neck. I put one coat of tung oil on the neck and there are obvious yellow stains where the glue spilled. What should I do to remove the super glue? The neck is flamed maple. |
|
| Author: | Fred Tellier [ Mon Jan 18, 2010 4:12 pm ] |
| Post subject: | Re: Removing super glue |
CA debonder will soften the glue but if it is soaked into the wood it might not totally remove it. I got some on an acoustic top once and got it out but it was a pain and requires some sanding also. Fred |
|
| Author: | Michael Dale Payne [ Mon Jan 18, 2010 5:28 pm ] |
| Post subject: | Re: Removing super glue |
If you had pore sealed with epoxy you will have to sand that area to wood re-pore fill. Other pore fills may react to the CA diffently Without taking the neck back to bare wood. no mater what you do you will likely have a noticable difference in hue there. How much of a difference is hard to know in advance. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|