Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Nov 28, 2024 3:54 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Thu Feb 05, 2009 2:41 pm 
Offline
Cocobolo
Cocobolo

Joined: Thu Jan 06, 2005 2:40 am
Posts: 148
Location: United States
Just finished my first electric and now am at the point of intonating it. Can someone describe the process for doing so? I assume I get each open string in tune and then check if it is in tune at the 12th fret. Anything else I should know or be doing?


Top
 Profile  
 
PostPosted: Thu Feb 05, 2009 5:58 pm 
Offline
Old Growth Brazilian
Old Growth Brazilian

Joined: Tue Dec 28, 2004 1:56 am
Posts: 10707
Location: United States
Lots of things have to be checked but if you get the first three right then the rest tends to fall onto place. Yes open and 12 fretted need to on pitch with each other with in a given tolerance but so does open and 12 harmonic. Open and 12th harmonic are natural scale length notes one is full length and the other is at the half scale node. These two notes impart no stretch to the string out side of oscillation of the string. Because of this these two are the easiest to set to first. The 12 fretted note will most likely be a tad sharp because the string stretches as it is fretted. Add to that finger placement can and will affect how much it stretches this note has a tolerance limit built in just by its self so use a capo fairly near the fret and at the same place each time to be consistent. If you can get all three of these notes in tune equally with in a cent or two you are in good shape. you will never get all three perfect so don't drive yourself made trying. A guitar is not a perfect pitch instrument it is a tempered pith instrument.


Top
 Profile  
 
PostPosted: Thu Feb 05, 2009 7:37 pm 
Offline
Koa
Koa

Joined: Thu Jan 24, 2008 2:13 am
Posts: 902
Location: Caves Beach, Australia
Make sure that your Nut slots are at correct depth and that the neck relief and bridge saddle height are set to your preferences first and use fresh strings. All these will affect the innotation so get them right first.

I will disagree with Michael's comments above, in that I never bother checking the stopped harmonics, it is just not relevant.

Tune the open strings, fret at 12th with normal pressure not a death grip and check the note produced, if sharp move the saddle back(away from the neck). retune open string check again, etc till open and 12th are both right.


Top
 Profile  
 
PostPosted: Sun Feb 08, 2009 8:24 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Feb 15, 2006 7:37 am
Posts: 4805
I've tried the 12th fret harmonic, but prefer fretting at the 12th.


Top
 Profile  
 
PostPosted: Sat Apr 04, 2009 5:06 pm 
Offline
Cocobolo
Cocobolo

Joined: Wed Jan 30, 2008 2:03 am
Posts: 198
Location: USA
First name: Brett
Last Name: Faust
City: Puyallup
State: WA
Zip/Postal Code: 98373
Country: USA
Focus: Build
Status: Professional
Set up action, nut and relief first, then intonate.Do them in playing position for best results.
Gravity has a way of changing the relief ,especially in lightly built guitars.


Top
 Profile  
 
PostPosted: Sat Apr 04, 2009 10:05 pm 
Offline
Koa
Koa
User avatar

Joined: Fri Feb 20, 2009 9:43 pm
Posts: 774
Location: Philadelphia, USA
First name: Michael
Last Name: Shaw
City: Philadelphia
Country: USA
Focus: Build
Status: Semi-pro
I never felt the need for a strobe tuner. To expensive for me. If you already have one fine but i have done it for years with a korg chromatic tuner using the 12th fret method. And like Brett mentioned do it in a playing position. Sounds akward but it really isn't.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com