Official Luthiers Forum!
http://mowrystrings.luthiersforum.com/forum/

Third project : The Imago
http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10123&t=21584		 Page 1 of 5
Author:  Jojobilou [ Sun Mar 22, 2009 8:26 am ]
Post subject:  Third project : The Imago
Hi,

I'm building my third electric guitar, perso design :

The specs :
Body :Sipo mahogony
Top : Burl maple
Neck : 5 parts maple/paduk with wenge and maple sheets...
Headplate : ebony, MOP inlay (Imago et Dragonfly),
Ebony fretboard 24 cases, with LP Standard style MOP inlays
Snakewood bindings fot the body and the fretboard...
Piclups : P90 style made by a french luthier : Franck Chérubin

Some pics :

Top gluing :
Image

Image

Planing the ebony headplate :
Image Image

Gluing the neck blanks :
Image Image

The planed neck :
Image Image

Body template and rough band sawing of the body and top :

Image Image Image

Pearl cutting saw and vacuum for the MOP dust :
Image Image
Image

Result after needle file :
Image

Then, the dragonfly, white and black MOP :
Image Image

Image

I didn't work for 3 weeks on the guitar because I built a drum sander :D :

Image
Image

It works great and helps a lot for thicknessing (???) the snakewood bindings... ;)

To be continued... (I'm gluing the peghead ears)...

See ya,

Jojo
Author:  Jojobilou [ Sun Mar 22, 2009 2:07 pm ]
Post subject:  Re: Third project : The Imago
Hi, :D

Work of the day :

Head angle with a ryoba saw :
Image

Then, trueing the glueing faces with a plane and glueing the ears :
Image
Planing and drum sanding !!! :P
ImageImage

I used two little "pins" to avoid slipping (??) during the clamping cession :
Image Image Image Image


And thickness drum sanding fot the snakewood bindings, the ebony fretboard and headplate :
Image Image

I'll continue the job on the neck these weeck...

Comments and critics are welcomme of course... ;)

Have a nice evening,

Jojo

P.S. : sorry for my bad english... :? [uncle]
Author:  Jojobilou [ Mon Mar 23, 2009 12:55 pm ]
Post subject:  Re: Third project : The Imago
By the way, I realise I didnt post the plan : http://membres.lutherie-amateur.com/joj ... ago_A0.pdf ;)

Your advices are welcome... :P
Author:  SniderMike [ Tue Mar 24, 2009 12:40 am ]
Post subject:  Re: Third project : The Imago
Jojo, that looks great! Nice job on the inlay. I really like the neck laminations as well. My one bit of advice would be that I don't think the neck tenon needs to extend past the neck pickup. In fact, I don't think it even needs to go under the neck pickup, unless I'm looking at things incorrectly.

Anyway, awesome job. I look forward to seeing the finished product.
Author:  Jojobilou [ Tue Mar 24, 2009 1:52 am ]
Post subject:  Re: Third project : The Imago
Thanks for the comments Mike :D ;)

For the neck tenon, I just wanted to try the "long tenon set neck" after a neck trough construction with the explorer and a classical set neck with the second guitar...

But in fact, my laminated neck blanck is ti short, it will only extend to neck neck pickup cavity... :oops: :lol:

Have a nice day,

Regards,

Jojo
Author:  Jojobilou [ Tue Mar 24, 2009 5:09 am ]
Post subject:  Re: Third project : The Imago
Hi,

I can't edit my posts... is it normal ? :oops:
Author:  Jojobilou [ Thu Mar 26, 2009 4:47 pm ]
Post subject:  Re: Third project : The Imago
Hi there !

Work of the last two evenings...

Gluing the headplate lamination (wenge, maple, ebony) :
Image

The angle for the headplate :
Image Image Image Image

truss-rod canal (ugly [xx(] but with some wenge sheets, the rod wont move) :
Image

Gluing the headplate :
Image Image

Have a nice evening,

Comments are always welcome... [uncle] :D

Jojo
Author:  James Orr [ Fri Mar 27, 2009 1:06 am ]
Post subject:  Re: Third project : The Imago
Beautiful work!
Author:  Jojobilou [ Fri Mar 27, 2009 5:29 am ]
Post subject:  Re: Third project : The Imago
Thanks James ! Image ;)
Author:  Jojobilou [ Mon May 11, 2009 1:46 am ]
Post subject:  Re: Third project : The Imago
Hi everybody !

I didn't work for a long time, but the last two days, I find the time for... bliss

So, fretboard, head and neck... :D

Slots :
Image


And a beautiful newbie mistake with the router... :roll:
Image Image
I'll fill the gap with epoxy and ebony dust...

Then, I glued the fingerboard bindings :
Image Image

Cavities for the LP standard style inlays and glueing :
Image Image Image

Then I glued the fingerboard on the "square" neck :
Image

Head templates, and routing the neck and head :
Image Image Image Image

And a template for the pickups 8) :
Image

Comments and advices are welcome as usual... ;)

Have a nice day !!! :D

Jojo

P.S. : still sorry for my bad english... :oops:
Author:  jordan aceto [ Mon May 11, 2009 6:26 pm ]
Post subject:  Re: Third project : The Imago
Great pictures, keep 'em coming!
Author:  Jojobilou [ Tue May 12, 2009 1:44 am ]
Post subject:  Re: Third project : The Imago
Thanks Jordan... ;)
Author:  turmite [ Wed May 13, 2009 12:39 pm ]
Post subject:  Re: Third project : The Imago
Jojobilou thanks for posting this in process build. This sure helps those of us that are a little afraid to take the jump.

I love the design of the guitar. Is it your design or??

Would it be permissable to make a few design changes?

Mike
Author:  Jojobilou [ Wed May 13, 2009 3:33 pm ]
Post subject:  Re: Third project : The Imago
turmite wrote:
Jojobilou thanks for posting this in process build. This sure helps those of us that are a little afraid to take the jump.
You're welcome, that's what the forum is made for... :)

I'm a beginner, and forums help me a lot, so I try to share my little experience too... ;)

turmite wrote:
I love the design of the guitar. Is it your design or??
Thanks a lot Mike, and yes, it's a design of mine...

turmite wrote:
Would it be permissable to make a few design changes?
I'm sorry, I don't understand what you mean... :oops:

If you want to use it and change it, no problem... I you want me to change it, too late... :lol: ;)

Thanks again...

Jojo
Author:  turmite [ Thu May 14, 2009 1:11 am ]
Post subject:  Re: Third project : The Imago
Hi JoJo,

No, I sure don't want you to change it. I wanted to make a double cut away out of it, but I have not found anything that looks as good as the original. I did tweak the head stock a little but it is very minor.

I will be watching this thread.

Mike

Jojobilou wrote:
turmite wrote:
Jojobilou thanks for posting this in process build. This sure helps those of us that are a little afraid to take the jump.
You're welcome, that's what the forum is made for... :)

I'm a beginner, and forums help me a lot, so I try to share my little experience too... ;)

turmite wrote:
I love the design of the guitar. Is it your design or??
Thanks a lot Mike, and yes, it's a design of mine...

turmite wrote:
Would it be permissable to make a few design changes?
I'm sorry, I don't understand what you mean... :oops:

If you want to use it and change it, no problem... I you want me to change it, too late... :lol: ;)

Thanks again...

Jojo
Author:  DGr33n [ Thu May 14, 2009 12:38 pm ]
Post subject:  Re: Third project : The Imago
Hello Jojo, lookin good, can't wait to see it finished.
Do you have info on building the drum sander? Or know where I can find some?
Thanks alot, keep up the good work [:Y:] [clap]
Daniel :mrgreen:

P.S. Your english isn't nearly as bad as my french would be. So no worries.
Anyways I'm an American, so I'm used to bad english. laughing6-hehe
Author:  Jojobilou [ Fri May 15, 2009 4:22 am ]
Post subject:  Re: Third project : The Imago
Hi Daniel, thanks for the nice comments... ;)

DGr33n wrote:
Do you have info on building the drum sander? Or know where I can find some?


Sorry, I only have the link to the subject in the french forum where I discover lutherie, but there is a lot of pictures :

http://www.lutherie-amateur.com/Forum/v ... 44#p278944

My "plan" :
http://membres.lutherie-amateur.com/joj ... e_jojo.pdf

Hope, it can help... :)

DGr33n wrote:
P.S. Your english isn't nearly as bad as my french would be. So no worries.
Anyways I'm an American, so I'm used to bad english. laughing6-hehe
laughing6-hehe ;)
Author:  DGr33n [ Fri May 15, 2009 7:29 pm ]
Post subject:  Re: Third project : The Imago
Thanks alot Jojo, I'm a member there too, just not a "supporting" member, yet.
I use http://babelfish.yahoo.com/ to translate. It helps alot, but not 100%
Merci pour toute votre aide. Je suis sûr que j'obtiendrai beaucoup d'utilisation hors de la ponceuse de tambour.
Author:  Mitch Johnson [ Fri May 15, 2009 7:47 pm ]
Post subject:  Re: Third project : The Imago
Beautiful work! Good photography too. Can't wait to see the rest of your progress and the finished project! [:Y:]
Author:  Corky Long [ Fri May 15, 2009 11:31 pm ]
Post subject:  Re: Third project : The Imago
Ummmm ..... uh oh. I've been building acoustics up until now... I think I'm in trouble...
Author:  Jojobilou [ Sat May 16, 2009 7:03 am ]
Post subject:  Re: Third project : The Imago
Thanks a lot guys!!! :D

Don't really got time for lutherie these WE, but I've radiused the fretboard these morning... ;)


Image Image Image

DGr33n wrote:
Thanks alot Jojo, I'm a member there too, just not a "supporting"member, yet.
I use http://babelfish.yahoo.com/ to translate. It helps alot, but not 100%

Excellent... :D

DGr33n wrote:
Merci pour toute votre aide. Je suis sûr que j'obtiendrai beaucoup d'utilisation hors de la ponceuse de tambour.
I always like the "bot" translations... laughing6-hehe
You're right, drum sander is "mega" useful... [:Y:]

Have a nice WE everyone,

See ya... :P

Jojo
Author:  DGr33n [ Sat May 16, 2009 1:48 pm ]
Post subject:  Re: Third project : The Imago
That's funny, I've always wondered what it looks like on the other end. I'm sure I have made a fool of myself a time or two.

The fretboard looks great, I really like the snakewood
Author:  Dennis Leahy [ Sat May 16, 2009 4:33 pm ]
Post subject:  Re: Third project : The Imago
Jojo, that's really beautiful, and well documented too!

Thanks!

Dennis
Author:  Jojobilou [ Sun May 17, 2009 1:39 pm ]
Post subject:  Re: Third project : The Imago
Thanks Dennis and Dan :D

DGr33n wrote:
That's funny, I've always wondered what it looks like on the other end. I'm sure I have made a fool of myself a time or two.

;) The funniest in the translation above is "la ponceuse de tambour" for drum sander... in french, you call it "ponceuse calibreuse"... "la ponceuse de tambour" sounds like "the snare drum sanding machine" something like that... :lol:

These afternoon, I made the cavities for the Imago white pearl inlay :

Image Image

And a 1/2" roundover for the sipo mahagony body :
Image

That's all for today... ;)

Jojo
Author:  Jojobilou [ Mon May 25, 2009 11:54 am ]
Post subject:  Re: Third project : The Imago
Hi there ! :)

I wasn't at home these WE, but I found some time for working today... ;)

Here is the "Imago" inlay sanded, there is still little holes to fill with epoxy :
Image


Then, the cavities for the dragonfly white and black MOP inlay...

Image

That's all for today...

Comments are welcome of course... ;)

Regards,

Jojo
Page 1 of 5 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/