| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| LP Set-Neck Maker Vendor?? http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10123&t=20068 |
Page 1 of 1 |
| Author: | Miketobey [ Wed Dec 17, 2008 8:02 am ] |
| Post subject: | LP Set-Neck Maker Vendor?? |
With my shoulder problems I have to choose my "Battles." Does anyone have a lead on a luthier who will sell a "rough" shaped long tenon neck for a Les Paul? Thanks, Mike T. |
|
| Author: | Michael Dale Payne [ Wed Dec 17, 2008 9:29 am ] |
| Post subject: | Re: LP Set-Neck Maker Vendor?? |
I saw knock off pre-carved neck set necks on ebay several months ago. I doubt they would have fit a Gibson body. There are a few pre built unfinished kit out there but I have never seen any with the Gibson joint |
|
| Author: | JJ Donohue [ Wed Dec 17, 2008 10:39 am ] |
| Post subject: | Re: LP Set-Neck Maker Vendor?? |
Miketobey wrote: With my shoulder problems I have to choose my "Battles." Does anyone have a lead on a luthier who will sell a "rough" shaped long tenon neck for a Les Paul? Thanks, Mike T. Mike...Check out John Watkins at CNC Guitar Parts. He does a lot of stuff on his CNC that may not even be advertised. I also know that he has personally built LP types and may already know what you need. Tell him I sent you. Good luck! |
|
| Author: | Kyle Vandewart [ Wed Dec 24, 2008 1:18 am ] |
| Post subject: | Re: LP Set-Neck Maker Vendor?? |
You should check out Soulmate Guitars. I've never used them, but I've heard awesome things about them, and you get a HUGE choice in wood variety/customization. Everyone I've ever talked to who has used them was blown away and expectations were more than met. Worth a look anyway... |
|
| Author: | Jonas [ Thu Jan 08, 2009 4:25 pm ] |
| Post subject: | Re: LP Set-Neck Maker Vendor?? |
another vote for Soulmate. |
|
| Author: | Miketobey [ Thu Jan 08, 2009 6:56 pm ] |
| Post subject: | Re: LP Set-Neck Maker Vendor?? |
Thank you for the tips. As it worked out, Roman Rist, a very fine luthier is making one for me. I do have big news, however, duplicator carver coming. MT |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|