Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sat Nov 23, 2024 2:51 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 38 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Model June
PostPosted: Sat Jan 04, 2014 7:48 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Fri Jan 15, 2010 3:34 pm
Posts: 2047
First name: Stuart
Last Name: Gort
Country: USA
Focus: Build
Status: Semi-pro
It's about time I got these photos shot and published. I've had model June complete for a few months now.

This guitar is Bamboo, Purple Heart, and Bubinga...incorporating this three layered effect in several places on the instrument. The pickups are Dimarzio's answer to noisy P-90's....a noise cancelling humbucker wound to emulate the growl of the classic P-90.

June is a true small semi-hollow body. The inside of this guitar is quite empty. The tone is warm and smooth as is expected of a semi-hollow body guitar. I expect a small bit of that warmth is attributable to the Bamboo. I made four prototype models of June out of varying woods to test that theory.


You do not have the required permissions to view the files attached to this post.

_________________
I read Emerson on the can. A foolish consistency is the hobgoblin of little minds...true...but a consistent reading of Emerson has its uses nevertheless.

StuMusic


Top
 Profile  
 
 Post subject: Re: Model June
PostPosted: Sat Jan 04, 2014 7:53 pm 
Offline
Contributing Member
Contributing Member

Joined: Tue Oct 18, 2005 12:50 pm
Posts: 729
Location: United States
First name: John
Last Name: Lewis
City: Newnan
State: Georgia
Zip/Postal Code: 30265
Country: USA
Focus: Build
Status: Amateur
Pretty snazzy sir! I like it. I like it a lot.

_________________
John Lewis
Wannabe builder owned by 2 crazy dachshunds



These users thanked the author John Lewis for the post: Stuart Gort (Sat Jan 04, 2014 8:53 pm)
Top
 Profile  
 
 Post subject: Re: Model June
PostPosted: Sat Jan 04, 2014 9:28 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2660
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
Stuart,
This instrument is truly a work of art.
The precise construction is uncanny.
Great work!
Dan

_________________
wah
Wah-wah-wah-wah
Wah



These users thanked the author dzsmith for the post: Stuart Gort (Sun Jan 05, 2014 1:04 am)
Top
 Profile  
 
 Post subject: Re: Model June
PostPosted: Sat Jan 04, 2014 9:40 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Nov 04, 2010 1:46 pm
Posts: 2150
First name: Freeman
Last Name: Keller
Focus: Build
Status: Amateur
What John Lewis said - I like that a lot too.



These users thanked the author Freeman for the post: Stuart Gort (Sun Jan 05, 2014 1:04 am)
Top
 Profile  
 
 Post subject: Re: Model June
PostPosted: Sat Jan 04, 2014 9:50 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Jan 10, 2008 5:08 am
Posts: 1906
Location: Raleigh, NC
First name: Steve
Last Name: Sollod
Focus: Build
Status: Amateur
Very nice! [clap] [clap] [clap]

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com



These users thanked the author sdsollod for the post: Stuart Gort (Sun Jan 05, 2014 1:04 am)
Top
 Profile  
 
 Post subject: Re: Model June
PostPosted: Sat Jan 04, 2014 10:11 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5821
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
Tres sharp, Stuart. I like it very much.

_________________
"Act your age, not your shoe size" - Prince



These users thanked the author Chris Pile for the post: Stuart Gort (Sun Jan 05, 2014 1:04 am)
Top
 Profile  
 
 Post subject: Re: Model June
PostPosted: Sat Jan 04, 2014 10:13 pm 
Offline
Koa
Koa
User avatar

Joined: Fri Feb 01, 2008 11:37 pm
Posts: 1740
Location: Virginia, USA
Focus: Build
Status: Amateur
Love the design! Beautiful!

_________________
Mike

The only thing nescessary for evil to thrive is for good men to do nothing.



These users thanked the author Mike Baker for the post: Stuart Gort (Sun Jan 05, 2014 1:04 am)
Top
 Profile  
 
 Post subject: Re: Model June
PostPosted: Sun Jan 05, 2014 12:03 am 
Offline
Cocobolo
Cocobolo

Joined: Sat Apr 28, 2012 7:27 pm
Posts: 277
First name: James
Last Name: Greene
State: Maine
Focus: Build
Status: Semi-pro
Very unique layering effects. I like it.



These users thanked the author Irving for the post: Stuart Gort (Sun Jan 05, 2014 1:04 am)
Top
 Profile  
 
 Post subject: Re: Model June
PostPosted: Sun Jan 05, 2014 2:36 am 
Offline
Contributing Member
Contributing Member

Joined: Mon Jul 11, 2011 12:43 am
Posts: 1326
Location: chicagoland, illinois
City: chicagoland
State: illinois
Country: usa
Focus: Build
Status: Amateur
i've been eyeing bamboo cutting boards for the past few years, scheming and dreaming about making a body with it. very nice work.
how did it mill? any surprises? bamboo is a grass after all, and not wood...



These users thanked the author nyazzip for the post: Stuart Gort (Mon Jan 06, 2014 3:37 pm)
Top
 Profile  
 
 Post subject: Re: Model June
PostPosted: Sun Jan 05, 2014 8:27 am 
Offline
Cocobolo
Cocobolo

Joined: Fri Jul 01, 2011 9:17 am
Posts: 381
First name: Michael
State: AR
Country: USA
Focus: Build
Status: Amateur
Beautiful and very clean looking Stuart -and it looks like it wants to be played.



These users thanked the author Sandywood for the post: Stuart Gort (Sun Jan 05, 2014 10:52 am)
Top
 Profile  
 
 Post subject: Re: Model June
PostPosted: Sun Jan 05, 2014 11:01 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Fri Jan 15, 2010 3:34 pm
Posts: 2047
First name: Stuart
Last Name: Gort
Country: USA
Focus: Build
Status: Semi-pro
nyazzip wrote:
how did it mill? any surprises? bamboo is a grass after all, and not wood...


You can tell it wants to be stringy...but it didn't pull out so it really wasn't any particular challenge. Port Orford Cedar was substantially harder to machine.

Thanks for the nice comments gentlemen.

_________________
I read Emerson on the can. A foolish consistency is the hobgoblin of little minds...true...but a consistent reading of Emerson has its uses nevertheless.

StuMusic


Top
 Profile  
 
 Post subject: Re: Model June
PostPosted: Sun Jan 05, 2014 11:02 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Fri Jan 15, 2010 3:34 pm
Posts: 2047
First name: Stuart
Last Name: Gort
Country: USA
Focus: Build
Status: Semi-pro
For what it's worth...those photos were not Photoshopped except for subtle contrast and brightness alterations. I took the photos against a neutral gray background...some mat board bought at a local art supply store. I've never had such an easy time getting a good color balance.

_________________
I read Emerson on the can. A foolish consistency is the hobgoblin of little minds...true...but a consistent reading of Emerson has its uses nevertheless.

StuMusic


Top
 Profile  
 
 Post subject: Re: Model June
PostPosted: Sun Jan 05, 2014 3:42 pm 
Offline
Contributing Member
Contributing Member

Joined: Mon Jul 11, 2011 12:43 am
Posts: 1326
Location: chicagoland, illinois
City: chicagoland
State: illinois
Country: usa
Focus: Build
Status: Amateur
Quote:
I took the photos against a neutral gray background...some mat board bought at a local art supply store. I've never had such an easy time getting a good color balance.


color aside, i have realized that for getting a good exposure (especially if the exposure settings are not manual), it helps to photograph a dark subject against a dark background, a light subject against a light background, a medium darkness subject on a medium darkness background, and so on....


Top
 Profile  
 
 Post subject: Re: Model June
PostPosted: Sun Jan 05, 2014 3:49 pm 
Offline
Cocobolo
Cocobolo

Joined: Sat Aug 31, 2013 10:58 pm
Posts: 192
Location: usa
First name: george
Last Name: s
Country: usa
Focus: Repair
Status: Amateur
Did you mill the bridge and string stop on the back yourself?
GS


Top
 Profile  
 
 Post subject: Re: Model June
PostPosted: Sun Jan 05, 2014 5:15 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Fri Jan 15, 2010 3:34 pm
Posts: 2047
First name: Stuart
Last Name: Gort
Country: USA
Focus: Build
Status: Semi-pro
verhoevenc wrote:
Where'd you get the bamboo billets?
Chris


At a local lumber store Chris. They caught my eye and I became enamored with the notion of using them.

Amazingly stable material...there isn't the slightest movement with massive changes in moisture content.

_________________
I read Emerson on the can. A foolish consistency is the hobgoblin of little minds...true...but a consistent reading of Emerson has its uses nevertheless.

StuMusic


Top
 Profile  
 
 Post subject: Re: Model June
PostPosted: Sun Jan 05, 2014 5:21 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Fri Jan 15, 2010 3:34 pm
Posts: 2047
First name: Stuart
Last Name: Gort
Country: USA
Focus: Build
Status: Semi-pro
gxs wrote:
Did you mill the bridge and string stop on the back yourself?
GS


Yes, George.

_________________
I read Emerson on the can. A foolish consistency is the hobgoblin of little minds...true...but a consistent reading of Emerson has its uses nevertheless.

StuMusic



These users thanked the author Stuart Gort for the post: gxs (Tue Jan 07, 2014 11:45 am)
Top
 Profile  
 
 Post subject: Re: Model June
PostPosted: Mon Jan 06, 2014 2:34 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Fri Jan 15, 2010 3:34 pm
Posts: 2047
First name: Stuart
Last Name: Gort
Country: USA
Focus: Build
Status: Semi-pro
Ooooh...the Neopolitian Plyboo would look VERY nice as a guitar!

_________________
I read Emerson on the can. A foolish consistency is the hobgoblin of little minds...true...but a consistent reading of Emerson has its uses nevertheless.

StuMusic


Top
 Profile  
 
 Post subject: Re: Model June
PostPosted: Mon Jan 06, 2014 7:55 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2010 9:06 pm
Posts: 2739
Location: Magnolia DE
First name: Brian
Last Name: Howard
City: Magnolia
State: Delaware
Zip/Postal Code: 19962
Country: United States
Focus: Repair
Status: Professional
Beautiful! The contrasts in materials are a bit much for me personally but an incredible looking instrument non tyre less. One question, I see no screws on the access covers for truss or electrics so what holds them on?

_________________
Brian

You never know what you are capable of until you actually try.

https://www.howardguitarsdelaware.com/



These users thanked the author B. Howard for the post: Stuart Gort (Mon Jan 06, 2014 3:38 pm)
Top
 Profile  
 
 Post subject: Re: Model June
PostPosted: Mon Jan 06, 2014 12:41 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Fri Jan 15, 2010 3:34 pm
Posts: 2047
First name: Stuart
Last Name: Gort
Country: USA
Focus: Build
Status: Semi-pro
I use small, low profile magnets there, Brian. They measure 1/8" in diameter and are .06 thick. I buy them through McMaster Carr but they don't actually list them in the online catalog.

These N42's are likely the very thing I'm getting through MM.

http://www.kjmagnetics.com/proddetail.asp?prod=D21

Honestly, I doubt any other wood is as stable as Bamboo with regard to moisture ingress and egress. Couple that with very stiff and light mechanical properties and it's hard to imagine a better neck wood, at least it ought to be in theory. I wouldn't presume to say this as a matter of fact. The guitar sounds wonderful...having a very mellow tone. I attribute some of that to the near hollow geometry of the body...and some of it to the Bamboo....and, of course, the pickups play into it. I'm not certain how much any one factor is affecting the tone of this guitar.

I built four of these guitars...the one shown, one of Walnut over Maple (Maple neck), one of Myrtlewood over Peruvian Walnut (Walnut neck), and one of Maple over Sapele (Sapele neck). I have the same pickups going into each one. I'll get a chance to really hear the difference in side by side comparisons once they are all finished and setup. After that I'll put some Seymour Duncan P-Rails in a few of them to better make the comparisons between the geometry differences of this guitar to the chambered "Elise" model.

For now, I'm working on the neck through model.

The pic is a shot of the inside of this guitar. June is as empty as AC DC's horn section.


You do not have the required permissions to view the files attached to this post.

_________________
I read Emerson on the can. A foolish consistency is the hobgoblin of little minds...true...but a consistent reading of Emerson has its uses nevertheless.

StuMusic


Last edited by Stuart Gort on Mon Jan 06, 2014 3:32 pm, edited 2 times in total.

Top
 Profile  
 
 Post subject: Re: Model June
PostPosted: Mon Jan 06, 2014 2:31 pm 
Offline
Koa
Koa

Joined: Fri Jan 25, 2008 9:55 am
Posts: 982
Location: Traverse City Michigan
Congrats Stuart. That's some good stuff there.


Sent from my iPhone using Tapatalk
Ken

_________________
Ken



These users thanked the author Ken McKay for the post: Stuart Gort (Mon Jan 06, 2014 3:40 pm)
Top
 Profile  
 
 Post subject: Re: Model June
PostPosted: Mon Jan 06, 2014 10:18 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Feb 21, 2008 8:57 pm
Posts: 1982
Location: 8.33±0.35 kpc from Galactic center, 20 light-years above the equatorial in the Sol System
First name: duh
Last Name: Padma
City: Professional Sawdust Maker
Focus: Build
Yo, Zlurgh,

June be nice piece of eye candy to me..makes me feels happy lookin at her.

Tell us, how do you think bamboo would perform in an acoustic...top and or back?


thanks
duh Padma

_________________
.

Audiences and dispensations on Thursdays ~ by appointment only.



.


Top
 Profile  
 
 Post subject: Re: Model June
PostPosted: Tue Jan 07, 2014 12:01 am 
Offline
Contributing Member
Contributing Member

Joined: Mon Jul 11, 2011 12:43 am
Posts: 1326
Location: chicagoland, illinois
City: chicagoland
State: illinois
Country: usa
Focus: Build
Status: Amateur
Quote:
I doubt any other wood is as stable as Bamboo with regard to moisture ingress and egress.


Quote:
Tell us, how do you think bamboo would perform in an acoustic...top and or back?


to be fair, bamboo (in these dimensions) is an engineered/laminated product. it grows in hollow tubes with a maximum diameter of say 6", with a wall thickness of maybe 1 inch- they aren't cutting out billets in a saw mill to produce slabs of it; it is glued together


Top
 Profile  
 
 Post subject: Re: Model June
PostPosted: Tue Jan 07, 2014 10:13 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Fri Jan 15, 2010 3:34 pm
Posts: 2047
First name: Stuart
Last Name: Gort
Country: USA
Focus: Build
Status: Semi-pro
the Padma wrote:
Tell us, how do you think bamboo would perform in an acoustic...top and or back?


I wouldn't presume to say without any acoustic building experience other than what I've gleaned from true luthiers.

Harry Houdini used to be one of my childhood heroes, not necessarily because of his escapes, but because he liked to debunk mystics and mediums. A man after my own heart. I spend a lot of time building stuff to challenge widely held assumptions. The Bamboo appealed to me not simply because of the way it looks (I think it looks very cool) but because it struck me as an unlikely tone wood...a novelty. As I worked it I became more encouraged that it would produce a fairly lively instrument. The warm tone of the guitar IS lively...which is to say that when I say "warm" I don't mean "dead". Even so...I wouldn't try to extrapolate any observation I've made to an acoustic instrument.

_________________
I read Emerson on the can. A foolish consistency is the hobgoblin of little minds...true...but a consistent reading of Emerson has its uses nevertheless.

StuMusic


Last edited by Stuart Gort on Tue Jan 07, 2014 10:19 am, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: Model June
PostPosted: Tue Jan 07, 2014 10:17 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Fri Jan 15, 2010 3:34 pm
Posts: 2047
First name: Stuart
Last Name: Gort
Country: USA
Focus: Build
Status: Semi-pro
nyazzip wrote:
...to be fair, bamboo (in these dimensions) is an engineered/laminated product. it grows in hollow tubes with a maximum diameter of say 6", with a wall thickness of maybe 1 inch- they aren't cutting out billets in a saw mill to produce slabs of it; it is glued together


Exactly...but it's pretty remarkable to observe the glue lines under a microscope. Yes...it's an engineered wood...but it's engineered pretty well, I'd say. :)

_________________
I read Emerson on the can. A foolish consistency is the hobgoblin of little minds...true...but a consistent reading of Emerson has its uses nevertheless.

StuMusic


Top
 Profile  
 
 Post subject: Re: Model June
PostPosted: Tue Jan 07, 2014 1:13 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Feb 21, 2008 8:57 pm
Posts: 1982
Location: 8.33±0.35 kpc from Galactic center, 20 light-years above the equatorial in the Sol System
First name: duh
Last Name: Padma
City: Professional Sawdust Maker
Focus: Build
Stuart Gort wrote:
the Padma wrote:
Tell us, how do you think bamboo would perform in an acoustic...top and or back?


I wouldn't presume to say without any acoustic building experience other than what I've gleaned from true luthiers.

Harry Houdini used to be one of my childhood heroes, not necessarily because of his escapes, but because he liked to debunk mystics and mediums. A man after my own heart. I spend a lot of time building stuff to challenge widely held assumptions. The Bamboo appealed to me not simply because of the way it looks (I think it looks very cool) but because it struck me as an unlikely tone wood...a novelty. As I worked it I became more encouraged that it would produce a fairly lively instrument. The warm tone of the guitar IS lively...which is to say that when I say "warm" I don't mean "dead". Even so...I wouldn't try to extrapolate any observation I've made to an acoustic instrument.



Gee Zlurgh,

The to be expected typical INFJ response. Non the less, thank you.

Me had no idea that there were false luthiers out there...Please define "true luthiers" for us.

Oh and me sure do like them oval fretboard markers. Them is real sweet.


as always
duh Padma

_________________
.

Audiences and dispensations on Thursdays ~ by appointment only.



.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 38 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 15 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com