***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Mon Nov 25, 2024 10:24 pm


Board index » Electric Guitar & Bass Construction

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 
  Print view Previous topic | Next topic 
Author Message
andyjs999
 Post subject: Plexiglass Template
PostPosted: Mon Jun 07, 2010 8:19 pm 
Offline
Walnut
Walnut

Joined: Sat May 22, 2010 6:19 pm
Posts: 29
First name: Andy
Last Name: Schrider
City: Fort Myers
State: FL
Zip/Postal Code: 33913
Country: United States
Focus: Build
Status: Amateur
Hey guys...I made a Plexiglass Template with my band saw and now I need to smooth out the edges. I can't seem to get it smooth by sanding it but I don't know how to use my router and get the curves smooth. Am I missing a step? Thanks!
Top
 Profile  
 
Steve Saville
 Post subject: Re: Plexiglass Template
PostPosted: Mon Jun 07, 2010 8:31 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Nov 26, 2005 7:32 pm
Posts: 1969
Location: United States
It should sand just fine, use wet/dry. It will not power sand very well because the heat created when saning gums things up. I would recommend against using a router. P/G is too brittle.

_________________
"An adventure is only an inconvenience rightly considered. An inconvenience is an adventure wrongly considered." G. K. Chesterton.
Top
 Profile  
 
andyjs999
 Post subject: Re: Plexiglass Template
PostPosted: Mon Jun 07, 2010 8:41 pm 
Offline
Walnut
Walnut

Joined: Sat May 22, 2010 6:19 pm
Posts: 29
First name: Andy
Last Name: Schrider
City: Fort Myers
State: FL
Zip/Postal Code: 33913
Country: United States
Focus: Build
Status: Amateur
Thanks man!
Top
 Profile  
 
Lillian F-W
 Post subject: Re: Plexiglass Template
PostPosted: Mon Jun 07, 2010 9:52 pm 
Offline
Koa
Koa

Joined: Fri Jun 30, 2006 4:23 pm
Posts: 1694
Location: United States
First name: Lillian
Last Name: Fuller-Watson
State: WA
Country: USA
Focus: Build
Status: Amateur
You can try chucking a drum sander into your drill press and stepping the speed down as low as it goes. Might still be too fast. Might not. Try it on a piece of scrap.

_________________
Aoibeann
Top
 Profile  
 
John A
 Post subject: Re: Plexiglass Template
PostPosted: Tue Jun 08, 2010 6:51 am 
Offline
Koa
Koa
User avatar

Joined: Thu Sep 24, 2009 9:50 am
Posts: 941
Location: Ellicott City, Md - USA
First name: John
Last Name: A
Focus: Build
Status: Amateur
I cut mine on the band saw as well. Then I taped my 1/2 guitar body 3/8 in ply wood template on the acrylic with doublesided tape. Then I put that on my router with a flush trim bit. Came out perfect. Cut one side of the guitar body first - then flip the wood template and cut the other side. Eyewear is essential !

_________________
It's this new idea from recent decades that everyone gets a participation award. - MUX
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 

Board index » Electric Guitar & Bass Construction

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 43 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com