Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
Any tips about doing a roundover on a dreadnaught kit http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10122&t=46132 |
Page 1 of 1 |
Author: | SARDude [ Thu Aug 06, 2015 11:47 am ] |
Post subject: | Any tips about doing a roundover on a dreadnaught kit |
I am about to build my second guitar kit, basically a D-28, and am considering doing a roundover on the top front edge. What tricks do I need to know about? |
Author: | johnparchem [ Thu Aug 06, 2015 1:33 pm ] |
Post subject: | Re: Any tips about doing a roundover on a dreadnaught kit |
How big of a round over? Like a bevel? I generally plane a few facets into the bindings and then sand them smooth. There are some threads showing people doing bevels on the forum I would search for those. for example: http://luthiersforum.com/forum/viewtopic.php?f=10101&t=45740&p=607317&hilit=arm+bevel#p607317 |
Author: | SARDude [ Tue Aug 18, 2015 8:06 pm ] |
Post subject: | Re: Any tips about doing a roundover on a dreadnaught kit |
I'm just wanting to ease the edge where your right arm rests. I'm not sure how to build up the area to allow beveling it. |
Author: | johnparchem [ Tue Aug 18, 2015 8:35 pm ] |
Post subject: | Re: Any tips about doing a roundover on a dreadnaught kit |
I plane or scrape the corner of the binding, and use sand paper to round it off. You will want to do this as the corner sure hurts while playing. |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |