| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| looking for a neck builder for some guitar kits http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10122&t=36892 |
Page 1 of 1 |
| Author: | squirrel-friend [ Thu Jun 21, 2012 9:07 pm ] |
| Post subject: | looking for a neck builder for some guitar kits |
Hey all, Think I'm going to like it here! Lots of awesome advice and info that I've found so far. I'm fairly new to guitar building(electrics). Right now, all I'm doing is guitar bodies and custom graphics but hopefully will be getting into necks and neck through's sometime soon. Not much time these days with the wife in school and a two year old! I put together old school rock replica guitars. I do plenty of strat style and les paul/sg models but I'm wanting to start offering some Jackson replica kits. Firebird and round horn v's mainly since they don't build these anymore not even through the custom shop. Anyone know of a builder who could supply me with some Jackson replica necks for my kits/bodies???? Specs would be maple necks with ebony boards, 22 jumbo frets, reverse head and reverse sharkfin inlays and binding on the fretboard and headstock. I have a neck that I could supply to use as a template. Any info would be much appreciated. Thanks guys! |
|
| Author: | Freeman [ Tue Jun 26, 2012 1:15 pm ] |
| Post subject: | Re: looking for a neck builder for some guitar kits |
I used one of Chris's necks on a tricone - he should be able to help you http://www.hanalei-moon.com/precarvednecks.html Also, there are several folks here who have cnc mills (but they may not check the kit subforum). Go to the cnc section and post your question. Possibly in the electric subforum also |
|
| Author: | squirrel-friend [ Thu Jul 05, 2012 9:00 pm ] |
| Post subject: | Re: looking for a neck builder for some guitar kits |
think i've been to that website before. might have to shoot them an email. and thanks for the tip....i'll re-post it in the cnc forum. thank you! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|