| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Shellac: Seal coat or No? http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10122&t=31392 |
Page 1 of 1 |
| Author: | oddmanout [ Sun Mar 06, 2011 2:50 pm ] |
| Post subject: | Shellac: Seal coat or No? |
I am using LMI's water-based pore filler with shellac to finish my guitar. Do I need a seal coat under the pore filler? The directions on the pore filler describe putting it directly on the wood, then sealing it. It seems many have talked about a seal coat of shellac first (certainly this is the order of ops when traditional pumice is used). I have some test pieces of scrap mahog on which I am testing both methods. Just curious to hear from those more experienced than I. Thanks! |
|
| Author: | Ti-Roux [ Sun Mar 06, 2011 4:40 pm ] |
| Post subject: | Re: Shellac: Seal coat or No? |
Well i'm not a lot experienced, but I would told you to put a wash-coat. It will seal the pores prior to get filled, and will prevent to stain wood, because some porefillers can stain. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|