| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Cutting neck joint http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10122&t=28202 |
Page 1 of 1 |
| Author: | devincox [ Tue Jul 13, 2010 9:42 pm ] |
| Post subject: | Cutting neck joint |
I am Almost ready to cut the scarf joint and was curious which saw was better for this joint. I have a new sears mitre/chop saw or a nice lynx tenon saw. Thank you, Devin |
|
| Author: | devincox [ Wed Jul 21, 2010 8:24 am ] |
| Post subject: | Re: Cutting neck joint |
Thank you for the response Filippo. I like using the handsaws more anyways. (c: Devin |
|
| Author: | segovia [ Mon Aug 09, 2010 10:00 am ] |
| Post subject: | Re: Cutting neck joint |
After much experiment I use a 5/8 fine blade in my bandsaw with a homemade jig John |
|
| Author: | devincox [ Mon Aug 09, 2010 12:25 pm ] |
| Post subject: | Re: Cutting neck joint |
John, I ended up trying several methods. I also messed up the neck blank twice, though unrelated to how I cut it, so I have received some practice cutting them. lol I dont use a fine blade, but a jig and my bandsaw, make this a painless process. I remove saw marks with 80 grit and then finish it with some 220. I just need more wood now. (c: Devin |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|